In order to heat the premises near residential and administrative booths, it is often necessary to put in place fittings that use the principle of a robotic convector. Navіt zvichaynі radiators, vstanovlenі bіlа dermal vіkn, chastkovo pratsyuyut for this principle. Zavdyaki yomu povitryane the middle of the kіmnati warms up even more quickly, equal to infrachervonim scorched. To this, the food of the convection heating is meritorious for the report review.
The phenomenon of convection is the natural movement of the covered masses, which can change the temperature. The more it heats up the more, the more it decreases its strength and that pet's mass. As if in the middle of the place where the space was spread, it was like a warm heat, which is growing again in one place, then the convective flow of the wind flows is the cause of the convection. The reason is that it is easy to get out of the air, wake up with important cold winds.
As a result, a circle of warmed masses is established, which pass through the core of heat, for which the wind in the room heats up. All objects and surfaces absorb heat from the heated air, which is why the principle of convective scorching is applied.
Dzherelo heat, attached to the front for heating the heated medium, - ce and є convector.
In order to find out how the convector winds up in other types of heating, it is necessary to know how heat can be expanded in the middle of the room. There are two such paths:
How does convection work, already understood. Іnfrachervone viprom_nyuvannya vipromіnyuє whether the surface is heated, its intensity to lie in the temperature of heating.
In order to create a warm heat flux, the surface is to blame for the temperature of 60 ° C and more, while other objects heat up in it, but not again.
Leather pobutovy prilad rozpovsyudzhuє warmly in ways. Ale, the convector's attachment is such that 90% of the energy of the vent is in the form of convection and less than 10% is in the production. For priming: water scorching radiator transfers close to 50% of the heat to the industrialists, to the convection.
The shards of the convector's manager are the warming up of the heat-treated mass, and also the transfer of the storage space to the minimum. The following main elements are included in the warehouse:
The design of the gas and electric convectors also has controls, control and automation. The heat exchanger has no plates made of midi or aluminium, cooled over the heating element. Installed in the middle of the casing in such a way that the sweat was repeated, dragging through the lower opening, heating up with the heat exchanger plates and leaving the name through the upper opening. The casing is made from steel or aluminium, made from the required colors.
During the working hours of the convector, the walls do not heat up to a high temperature. great victory vikoristannya priladu at any kind of childish installations. Children in no way piss off in the dot to the hot parts of the heater, and the stench cannot reach the hot heat exchanger.
The failure of the convector burns the surface of objects that are warmed up to a large extent. If you repeat in the middle of the cold place of the wine, it will take about 12 years for a comfortable heating.
The problem of infrared heating is a deadly problem, as it is too early to bring it to condition again, and the objects are warmed up quickly.
Convectors are subdivided into types, depending on the type of heating element:
At the design of the electric convector, the TEN protrudes as a heat core, mounted in the middle of the heat exchanger. I'm translating wine electrical energy in thermal and transfer to plates, and tі - check how to pass.
In the most modern electric heating accessories, the traditional TEN is daily, the tungsten or nichrome coil is placed right in the middle of the heat exchanger. Obigrіvach, which works in the field of electricity, is the most effective, and the KKD reaches 99%.
The robot of the electric convector uses an automatic thermostat, which keeps the temperature set at the appliance. Vіn attaches and controls the supply of electricity to the spiral for the signals of the temperature sensor. In sub-logic models of devices, an additional security sensor is installed, which fixes the position of the body. In case of a tumble switch, I will attach the sensor to the electric lance and a short circuit, and it won’t happen.
In gas convectors, the heat exchanger is heated with a heater, so that it can live on main or compressed gas. The new one also has a thermostat, as well as a safety gas valve, which reacts to the burning of the burner, indicating draft in dimary or lowering the pressure in the supply of fire. These devices are bulky and require a connection to Dimar. For the amount of heat consumption with gases that go, the KKD of such a convector does not exceed 85%.
Water convectors are the simplest and most important units. The finned heat exchanger at this point is just a pipe with plates mounted on it. Heat transfer pipes flow through the pipes with the same temperature, which is supplied from the boiler plant, heating the plates. There is no need to talk about KKD here, but the unit itself does not vibrate warmly, and in the process of transmission it does not use anywhere. That part of the thermal energy, which did not catch up with the transmission again, turns around at the same time from the heat carrier at the boiler.
Scorching systems with classic radiators can heat the premises in two ways - for additional convection and thermal ventilation. Well, if you talk about water convectors scorched, then the stench is only warming for the natural convection chamber, ensuring the circulation of warm air in the premises. Reach for the swedish one efficient heating room. What are water convectors and what is the stench of power? Let's talk about it within the framework of our look around.
So let's take a look:
After reading the material, you take away all the necessary knowledge about the annex.
Classical radiators heat up the walls and the most important objects, thereby heating the living quarters. In order to increase the efficiency, they are prepared from the ribs, the convective current is created again and again. Due to this, the security of the heating of private houses and apartments. The heat is delivered to the radiators for the help of the heated heat carrier - the most important is the tap water. At the place of residence, it is possible to go through the convection ribs, and at the sight of thermal ventilation.
The principle of convection is even simpler - heat up as you rise up the mountain, but in this place it will be colder.
Convection is good, because it will ensure the heating of the room for any type. Heat up the heat, rise to the stele, take off colder from the bottom, sighingly pass through the convectors. Zavdyaki the results of the robotic singing system become commemorated literally in the first year after the increase in scorching. The classic scorched battery cannot boast of similar results.
The principle of scorching water convectors is even simpler. The heat-carrier that flows through them heats the steel plates of the ribs. Warming up, I’m going up the mountain, but in the same place, I’m going to have a portion of the next. Here the pure laws of physics are practiced, ensuring that the living quarters are warmed up. The heating procedure is absolutely noiseless, not turbulent for the household.
Some water convector heaters have fans installed, which allow organizing primus convection with a method of warming up the room.
How is the power of water convectors scorched? We know the middle of them:
As you can see, there is nothing foldable in the outbuilding: a heat exchanger with connection nodes, closed by a housing.
Thermoregulators and drains are installed additionally - the first ones allow you to adjust the heating level, and the others serve for remote control of the scorching system. The attachment of convectors is even simpler, and today’s miniature is not allowed to fill the interior of living or working premises.
The scope of zastosuvannya water convector heaters is even wider. The stench victorious for the heating of private households, apartments near rich apartment houses, office, administrative, and commercial premises. Axis of transfers of їх gains:
Tse universal opalyuvalne obladnannya for any application.
Keeping an eye on the scorched convectors is even simpler - it is necessary to periodically clean the saw that accumulates on the elements of the rib. Here you will be in good luck with the pilosus, who will take care of the garne of soaking. The sight of the call is led up to a simple sight saw with a naked ganchirochka. Internal cleansing is carried out less often for a month, so that the accumulation of a large amount of zabrudnen is overtaken.
The day of diligent care for the accessories of the scorched brought to the accumulation of a great number of saws - natural convection spread throughout the whole place, so as not to give healthy people with allergies.
Now let's talk about the heat sinks and see the convector heaters on the water. For sale presented:
Let's take a look at all the reports.
Sub-logic convectors are often found in areas with panoramic windows. In what direction pipes for the supply of hot heat transfer are placed in the underlay. Installed heaters are built up to their fixing and connection to the scorch system. Vikoristovuyuchi the smallest and most compact models, you can reach the perfect view of the windows and even the warmest room.
Scorched water convectors are seen as an ideal solution for cinemas, exhibition pavilions and other buildings with high panoramic windows from pidlogs to the stele.
The real convector heaters on the water are characterized by the minimal bulk and compactness. Behind their stinks, electric convectors and secondary batteries tell the stench. High models are installed under the zvichayny podvіkonnya, and miniatures of different heights are installed with low podvіkonnya. The hearts of their design stench ensure efficient heating. In addition, stinks can be installed in the air of deaf walls.
These water convectors are victorious for warming the premises of various purposes - the main living quarters, offices, warehouses, shopping malls, warehouses and many others. The stench does not harass the space and protect the m'yaku, and it is practically incomprehensible to the circulation of the heated air. For designer interiors, fittings with decorative fittings are available.
Plinth convectors and scorched by a consistent innovation. The stench is aired miniature and is recognized for the installation of plinth scorching. Їх advantages:
Regardless of your miniature, apply singed logs to warm up the living quarters, creating a comfortable atmosphere.
Internal scorching water convectors will become a know-it-all for those who want to create the most addicted scorching system. As you can see from their names, the stench drowns itself right in the underlay, where special niches are created under them. Pipes are also laid there, which circulate heat. One large-width internal water convector to ensure that it is not heated and does not zipsuє inter'єr its own. with a sultry look- to guess about the presence of such an obigrіvach is possible only by decision, what masks, in the meantime.
De vikoristovuyutsya internal water convectors? The stench is indispensable for installation in premises with panoramic windows - on the vіdmіnu vіd low pіdlogovyh priladіv, the stink does not obscure the view from the windows chastkovo. Being completely sunk into the pit, convector heaters do not respect people's walks, so stench can be installed at the door openings, creating a barrier for cold air flows.
Indoor convectors of scorching are indispensable in the interiors, up to which the rise of the smoke is hanging until the dressing. Tse can buti exhibition halls, concert halls, museums and other places, de warming, which should be erased from the log, otherwise their real analogues will be unrewarding. Also, they are vicorous for heating private booths - the presence of visible elements of scorch systems allows you to create cicada interiors.
Another novelty in the world of opalous possession is the socle of water convectors. The stench is the relatives of the internal outbuildings, the shards are recognized for attached installation. The installation is installed near small niches, at walls, at gatherings, at partitions between rooms. Socle convectors allow you to create an invisible scorching system, which is highly efficient. stink become guiding choice for those who want to create an exclusive interior, in which there are no infamous accessories.
Basement convectors for scorching will require a connection to the electric line. Electricity is needed here for wrapping fans that create primus convection. In order to keep them less noisy, vicory growers are low-noise fans. Zavdyaks of this stench can help to induce nights without creating discomfort for households.
The choice of convector heaters starts at the stage of designing the scorching system, as well as during the life of the house. As if you are planning to win panoramic windows, look up to indoor and outdoor convectors and refurbish them for their vacation. In other situations, you can get along with wall models, roztashovuchi їх under windows and vzdovzh deaf walls. Another option for even more attached scorching is the baseboard convectors, which can be minimally scorched.
In order to correctly select the intensity of the convector heater, simply multiply the area of \u200b\u200bapplication by 100, subtract the number and it will be necessary for Watakh.
The necessary thermal attenuation is self-sufficient, as in the case of a large radiator, which outputs 100 W per 1 sq. m. m. What is worth choosing the edge of the virobnik, then there are some nuances - outbuildings, which are being built in Russia, are considered to be the best value for money and capacity. Zakordonne obladnannya yakіsnіshe, but on the road. As far as China, then an individual product is needed here, but the oscillations as Chinese products are not transferable.
Manufacturers of water convectors for scorching from Russia - TZPO, "Breeze", "KZTO Radiator", "Konrad", Varmann, "Izoterm", NBBK, "Vilma" and Technoheat.
When installing water convectors, it is necessary to close the scorch to the bottom - open the door at the bottom, so that you can open it. Optimum fit to the cover of the warehouse is 20-25 cm. back wall that wall of life - enough to cover 5 cm.
If it’s possible, then lay the scorched pipes in a blind place, even if they are installed later, the heaters themselves will look more aesthetically pleasing.
Pipe laying down according to the model of selected convectors - it can be either lower or lower. Pipes are laid in a fallow way, as if it comes out of the wall or a sublog. The remaining option is shorter, to that it is possible for me to cover all the pipes - such a scheme will come out neatly.
Convectors are installed in a strictly horizontal position– the correctness of the installation is controlled by the future level. Also, do not forget about the superficial fixation of possession, so that it did not break under the powerful draft. Vikonuyuchi installation work, it is necessary to be careful and not to allow physical interference on convectors, so that any breakdowns can be avoided.
For internal and underground convectors, we create niches - stinks are transferred to the plan of everyday life. To give respect, so that the dimensions of the interior were 3-4 centimeters larger, lower than the dimensions of the fixtures themselves. Also close the gap for a handy connection. After the laying of the underlayment material, the internal heating elements are masked with decorative grates, from which it will be warmer in the air.
The constant development of scorching systems called for until the appearance of new more functional outbuildings, which gave the name of the converter. The stench has been used as a place, for some:
The widest scalding water convector, which is characterized by simplicity, economy and reliability.
The classic convector has a pipe, which is equipped with numerically small fins. It is noteworthy that the main storage elements of such a building are prepared from different materials:
Between the water convector and the classic radiator, the scorching is already richly slept. The outbuildings are used for heating the premises, vicarious rare heat-carrying, which circulates, as a rule, water. The main vіdminnіst polagaє principle funktіonuvannya pristroїv:
Robotic principle based on natural convection. It’s colder, going down and going to the middle of the fixture, taking heat from the heated aluminum plates and copper pipes. At once, in vіshtovkhuє tepі and light povіtryаnі masi, yakі navpaki straight up the hill. In this way, an uninterrupted recovery is ensured.
Be it a water convector, the scorching is placed in a rectangular case, which is made of stainless steel. A grate is roztashovuetsya from above, so that you can be znimnoy or whole. Current models of vanes are equipped with shutters, which allow them to regulate flows.
It is necessary to perekonatis, that the plates, which are played with a copper pipe, fit snugly to it.
Crimean water convectors market for bags on gas and electric models. The first ones did not have a wide width; With the installation of others, the costs for electricity are significantly increased.
Water convectors are more simple and more expensive. The stench is easy to install, clumsy in operation and can cause a number of important advantages:
There are not many negative sides. Among them, varto designate as follows:
The market promotes a wide variety of water convectors scorched, which gives the possibility to the skin master to choose attachments, which inspires yoga. The duration of convectory is taken for two signs:
Introductory video review
Convention type
According to the type of convection, the extension is divided into two categories:
Primus convectors are installations, in which circulation is repeated under the influence of mechanical force. A low-power low-voltage (12 V) fan is mounted in the middle. Vіn not spozhivaє rich elektroenergії, prote nearby it is necessary to worry about the presence of life.
Natural convectors are not equipped with additional outbuildings that are heated, and the circulation of repeated flows is taken in a natural way. Cold masses, sinking down and volodying with a greater space, cherry warm, as they rise, reach, descend and change again warmly.
Convectors from primus circulation can again be used as the main scorching accessories. Natural circulation can be of little productivity, to that addition, which is practiced according to this principle, it is customary to vicorate as additive opalizing elements, or to make up for the warm veil in front of windows, or door.
According to the installation method, the scorching water convector can be up to one of three types:
The largest width of the nabula and pіdlogі (zvnіshі) outbuildings, yakі do not hovayutsya near the sings of the surface. The stench can be either end-faced or connected, as leather is chosen individually. The current models are inspired by a wonderful design, miraculously match with any kind of interior.
Among the advantages of the modern models of varto are significant:
There are wide demands among Vlasniks in small apartments, or among the occupants of high level moisture content. Main їх warehouse є:
The stench is taken away colder by the state surface, they play and direct the names. One hour hanging masi, the stench changes the rіven vologostі.
In the future, convectors may have numerical advantages. One can only call varity as a hundred nedolіk. You have to pay for comfort.
When choosing a scorching water convector, it is necessary to ensure a few important criteria. In them, I’ll build the staleness of the vikoristannya, nadіynіst, bezpeka toshcho.
Follow the respect for the method of curing:
In the first place, to launch the leather converter, once you happen to go without a hitch to the outbuilding for yoga, or omission. For another, you can work on the vіdstanі.
An important characteristic is the tension of the building. The greater the value, the more the heat will be repeated, and in the presence of warmth. A lot of potential buyers are aware that the hard fitting is delivering such troubles at the sight of noise. You can't find any cheap model of this small amount of relief and absolutely noiseless.
Not all outbuildings are equipped with such a brown additive element as a thermostat. However, Vіn duzhe korisny and practical. I control the flow temperature, I can determine the wine myself, if it is necessary to turn off the attachments, and if I turn it off. Golovne yoga confession - zabіgti overheating.
On a equal footing, the heating element is no less important. Vin with a tube, in a circulating heat exchanger. The main characteristic of yoga is the area that is in contact with dovkills. If there is more than that, then the efficiency of the chosen model will be the most important.
Follow the respect for the hull, so as an attachment that is bought, it is not only the fault of warming the premises, but also as harmoniously as possible fit into the interior, buti mіtsnim. The largest width of the nabuli.
Another one of these meals is a variant of accommodation. Choose podlogovy, nastіnny, or vbudovaniya pristriy kozhen is guilty independently. The most important thing is that the convector does not harass the space and does not care.
Video overview of the installed system
In the grip of
The skin of the bazhayuchy is free to save for his booth the water convector of the scorched, which pleases the yogo vimog. The versatility of the models is great, and all the stench may be impersonal advantages in comparison with classic scorching radiators. However, it is necessary to remember that the quality of such outbuildings is more expensive.
If water models are not suitable for reasons, you can choose from a variety of gas and electric convectors. However, regardless of all their practicality, the installation and maintenance will cost more trouble and save money.
On this contribution to the Internet, we help the project to help you find the installation required for your cottage. Heating installation including boiler, heating system, batteries, collectors, ventilation, pumps, pressure booster, thermostatic pipes, mounting, tank for expansion. Installation of a scorching summer cottage. The listed nodes of the system are very important. Therefore, the consistency of all parts of the structure is important to be technically correct.
Budіvlі that spores, roztašovanі in all climatic zones of our country, require heating systems. Water scorching convectors are one of the widest, inexpensive and efficient devices that are used to support the temperature and moisture regime. At Russian Federation dіє GOST 31311-2005. which signifies vimogi to the point of opalous possession.
Convectors of water scorching are evenly warmed up every once in a while.
The power of the heated object to give heat to in the middle widely vikoristovuєtsya in scorching systems. Water convectors transmit energy to objects that are close to each other. Heat transfer is carried out in two ways: radiation and convective, the left part over 95% falls on another warehouse flow. With the improvement of KKD, an attachment of this type can be superfluous up to 75% of the heat supplied to it.
Wall convectors in the circuits of scorching systems work in the following order:
Important! The stability of the process is within the reach of the constant renewal of the heated water in the middle of the battery.
Convectors of the water type are connected to the internal circuits, which have a circulating home. Water is brought to its own chamber to a high temperature in autonomous heating outbuildings - boilers or centrally supplied. Heat engineering fittings of convective type naboo wide width due to its high energy efficiency and safety in operation.
The present water convectors, which have the same type of other layouts, may have the following elements in their design:
Buy different types of convectors. It can be divided according to the material of the heat exchanger, tension, opal area, and the widest classification is carried out according to the type of installation.
Real water convector scorching is the absolute leader of this market. Its main headline is a small rosemary, for which you can install attachments on the walls near small loggias under the windows. Іsnuyut navit stelyovі convectors, scho vbudovuyutsya (pіdvіsnі), є є vіdmіnnymi sluchennyam for small apartments.
Sub-logic convectors The scorched waters are often victorious in the minds of the virobnicheskih robots. The stinks are blown away by the greater productivity and the load (often the pressure reaches 60-80 kW). The weight is up to 100 kilograms and more. The stench is more important than the old ones, but they stand an order of magnitude more, moreover, they have more serious vimogi to the safety equipment, installation and operation. In the main, the heating units are vertical, but also large horizontal extensions are intended for use with a diameter of 500 m 2. Heating for underlays is rarely vicorous for installation in bagat-overhead booths through folding installation and problems with permits.
Regardless of the type of installation, technical characteristics the design of water convectors for scorching is similar:
Also, water-hung convectors are equipped with additional fastening elements (braces, sashes), and sub-panels or panels with metal supports on the sub-log, there are models with a fan, primus ventilation or dimochny systems of scorching.
At the water heater, the temperature in the middle of the tank is controlled by a thermostat. As a rule, you can set the indicator here between 49 and 82 degrees Celsius. The temperature of the water, recommended by most experts, should be between 49 and 60 degrees Celsius. It’s better to drink hotter, so that it’s effective for drinking at home, but it’s not so hot that it becomes unsafe for opikiv.
Zanuryuvalny tube of cold water from communication lines pumps the motherland to the bottom of the tank, it starts to heat up. The mechanism of heating, the palnik or the element is working, the water does not reach the temperature, the thermostat has been adjusted. When the water is heated up, according to the laws of physics, it goes uphill, and the cold water goes down for heating. Heat pipes are roztashovanі at the upper part of the tank. Water at the exit from the water heater is hot in the tank, so be careful by turning on the tap on the "full".
Photo - Opaluvalna system Buderus
For great industrial premises, that apartment is more important than the water heating supply. Shvidkіst, from which the tank heats the water, is called yoga swidkіst vіdnovlennya. This figure indicates the amount of water in liters, which can be heated up to 50 degrees Celsius for 1 year. Obviously, as soon as you let the water out, it will heat up more.
Choose a water heater, which may be the necessary potential and the amount of water needed to be deposited, in addition, how much water is necessary for a home vikoristannya that with some kind of security You can stain. As a rule, heaters with a low cooling rate can increase the capacity of the tank. If you want to take more than an hour to heat the water, more yoga for a periodic beat.
Steel convectors are the most productive, stench is more likely to trim the temperature and make it more conductive, at the same time, as the middle dovgovichnishі zavdyaki high anti-corrosion authorities. Zvichayno, it’s rich in why the water supply and the coolness of the cold lie in the type of pipes, the number of which is that, as the radiators are installed at the apartment.
The middle radiator is scorched.
You can buy scorching water convectors in any store of scorching equipment in all Russia, their price depends on the brand and pressure (naturally, KSK 20 or KNN will be available, lower and imported Kermi). Sales are made both at dealerships, and once at factories, where technology is being manufactured.
The best convectors are not the ones that have a brand sticker on them, but the ones that kindly scorch the place. The editors of the industry have put together a rating of the best convectors in 2017 - now we will be careful.
A convector is a scorching accessory that transfers heat to convection from a heat carrier or a heating element to a place that is scorched.
The process, if natural convection rises uphill, and colder again takes up space, as it sounds, the construction of the prilad is strengthened.
The design of the convector krim dzherel heat includes a convection chamber (casing, housing). Establish control systems for automatic switching on of the convector for an hour of overheating or for difficult circulation. Deyakі models mayut vbudovaniya fan, for the rahunok zbіlshuєєst vіdkіst podіvі poіtrya, scho pіdvishuє effektіvіnіst scorched.
Convectors are safe extensions, simple and easy to use. Convectors reduce the cost of scorching by 30-40%.
How do you know about convectors? What a shortening convector and how to choose it, to clink bagatioh.
According to the method of installation, convectors are divided into:
For the method of heating, convectors are:
Convection can be:
It is more common to choose a wall convector; Optimum roztashuvannya convector - pіd viknom.
IMPORTANT! This way you can create the maximum tension of the thermal curtain, and the convector is not necessary to fall into the eyes.
Vіdminnіst podlogovogo convector vіd vіdnіnі polіgaє vіdminnostі spetsіlіnіn_zhok vstanovlennіa horizontal surfіne. To look at the advantages of both convectors, the main one is ease of installation.
Electric convector with increased area with thermal protection and insulation. The maximum heating intensity is 1000 W. Most of these models have the function of automatic switching off when switching Universal convectors can be hung on the wall, and installed, whether it's a handy place on the legs or a collar.
Vbudovuvani vnutrіshnopіdlogі convectors - vіdmіnne dіshennya, de ploshcha іgrіvі dosit great.
IMPORTANT! The integration of opal fittings can be plinths. You can hide them in drabinnі niches, pіdvіkonnya.
Leroy Merlin stores have a wide selection of convectors, but before buying, you should think about yoga tightness.
Electric convector Electric convectors for scorching are characterized by simplicity of design and accessibility. The stench will not require any folding pipes, or gas supply.
Construction: metal case with a heating element - TEN, the surface of which is equipped with plates or more fixings in an aluminum casing to increase the area of the surface heat transfer.
Electric convector Noirot Melodie Evolution (low) 1000 Heating process: through a small grate to the heating element, cold air is passed through, as it heats up to a predetermined temperature value and exits through the upper blinds.
An electric convector with a thermostat can be mounted. The most popular ones are also pіdlogovі, і stationary (vbudovanі vіdlogu). The optional electric convector should be selected according to the following parameters:
Ceramic wall convector Daewoo Electronics DHP 460 At the heart of ceramic electric convectors is a ceramic heating element, which provides a stable and safe robot accessory.
Advantages of energy-saving convectors:
In the height of the convector, lay down the heat - the greater the electric convector, the greater the draft and the speed of the passage through the middle.
Low models can be used for baseboard convectors. Їx height is kolivaetsya in the range of 0.15-0.2 m.
Convector on wheels For a house, low convectors (0.4-0.6 m) are not the best option. When choosing the next step, respect for the length of the scorching tool is a parameter that increases the area of the contact of the heating element and the cold wind. Vіn zbіshuє tuzhnіst convector.
The underside convector, as a rule, is narrow, long and not high (the crown is 20 cm in total), the wall convector is of great size (the crown is 40-50 cm).
Convectors with a fan have a number of functions:
IMPORTANT! The price of a convector with a fan is higher than the price, and the electric power of the fan is more.
A monolithic convector is an accessory for equipping with monolithic elements. It is characterized by a noiseless robot, the shards have a strong metal case, and the ribs are the main elements of it.
The stench functions with insignificant heat losses, and its efficiency and KKD are high.
Gas convector Hosseven HDU-3 Gas convectors are installed for heating the premises of various applications. Vykoristovuyut pristriy for singing the place, to which the main gas supply was brought (for the mind of the restless living).
Without a middle view of the balloon - in some cases, folding is blamed on the placement of balloons, especially if the kilka convectors. When it is necessary to repair the gas train and the wardrobe, during the hour of strong cold, it will be safe to repeat it, otherwise there will be problems with supplying fire to the burner.
Gas convectors can be wall-mounted with a fan.
Gas convector Alpine Air NGS-20 It is necessary to ensure that gas is supplied to the sub-floor and wall convectors under a heavy pressure, which is assigned to the technical passport for virib. The supply of fire from the cylinders should be organized through the reducer, and for this vice.
Convectors with a fan - upgraded models. Minus: uninterrupted annoying noise near the room from the robotic blowing.
Wall mounted convector AEG WKL 1503 S A convector on the wall is an option for heating, as it is most common to choose coristuvachi. The thermal regulator with the maximum heating temperature of the room and protects the electricity, when the set temperature is reached, the shards will boil.
A real steel convector with a temperature controller maintains the optimum temperature in the place to be scorched. In case of constant scorching in summer houses, the convector maintains a stable temperature, protecting the fire on the outside of the warming of the house.
Convectors vbudovani in pіdvіkonnya nadіyno protect the room from the penetration of the cold. The stench does not take up a lot of space.
Underfloor convector Hyundai H-HV9-20-UI650 The installation of convectors for the installation does not require special skills, the entire installation sequence is described in the instructions.
Podіlyayutsya pіdlogі convectors on kіlka types:
Under the convectors with a large building, a rich dovzhina, fallow in the presence of the convector tightness. Easily fit into any interior, often prepared for a prayer.
Underground convector At the box itself there is a heat exchanger made from midi or aluminum, which can have good heat conductivity. Once upon a time, it is necessary to work on internal cleansing.
IMPORTANT! Convectors of scorching water, which will be used in the pіdlog, pіdіyde for the room and bays from the panoramic slopes of the walls.
Internal convector Techno USUAL KVZ 200-65-800 Internal convectors - tse radiators, scho vbudovuyutsya in pіdlogu. The stench is water and electricity.
Plinth convector vicorist for applications with individual or central heating system.
Like a thermal dzherelo vikoristovuyut ol_ya, water and other rіdini.
Successfully replaces the traditional scorching radiator. Є pristroєm, which is folded from the body, prepared from different materials. As a rule, vicorist stainless or galvanized steel, which can increase resistance to corrosion.
Vnutr_shnyop_dlogovy convector Eva Coil-KTT80-1000 At the body there is a heat exchanger made of a copper tube, bent at the shape of the foot. Behind the aluminum ribs there is an increase in the surface area of the heat exchanger.
Decorative grati, mounted on top of the convector, made of steel, wood, aluminum.
The productivity of the deposit depends on the temperature of the heat transfer that is supplied, and the intensity of the flow, which is created around the heat exchanger.
Vykoristayutsya in different systems of scorching, which functions in a wide range of heat transfer temperatures - from 45 to 90°C. A tangential fan is installed, which ensures the increase in the intensity of the reverse flow, increases the productivity and speed of the heat supply to the convector.
IMPORTANT! Internal convector of scorching before the skin cob of the scorching season should be cleaned in the saw and smittya.
Water convectors provide:
Underfloor convector Carrera FRH The real water convector is characterized by a small vag and is mounted on a fenced structure. They are fixed with special ribs, which increase the heat output of the accessory. Mounting method for wall convectors - brackets.
The sub-logic models are installed on the base of any handy place, often under the window openings or the entrance doors. The method of fixing sub-logic convectors - special supports.
For the installation of convectors, which are to be built, zdіysnyuyut budіvelnі works, spramovavanі on prihovuvannya aggregatіv z mind. Special channels sporadzhuyuutsya near pіdlozі chi vlastovuyutsya small nіsh_ pіd vіknami.
Є outbuildings, which are transferred for the rahunok of constant circulation through the body warmly from the bottom uphill.
Behind the type of roztashuvannya proponuyutsya:
Fallow according to the heating method:
All models are equipped with a thermostat, which allows you to control the temperature in the room. Behind the principle of robotics, they follow - an electronic or mechanical convector.
Underfloor convector Ensto 1500 Convectors with a mechanical thermostat maintain a low surface temperature, show large voltage drops at the railing, and are characterized by a trivial term of service.
When choosing, they give respect to expansion, design features, ways of placement and tightness.
| Model | Krajina virobnik | Type | Features |
|---|---|---|---|
| Russian virobnik | Electrical | Intensity 1000 W; heating the premises up to 15m2; є possibility of temperature regulation; in case of overheating, it automatically flickers; equipment with a timer; noiseless; heating swede; small dimensions; presence ionizer repeat; designated for relocation of the colony; Possibility of connection to the butt line 220/230 V. | |
| Korea | Electrical | Intensity 2000 W; heating the premises up to 24m2; є thermostat; turns on in case of overheating; mehanіchne keruvannya is simple; yakіsne folding; three modes of tightness; in the kit - fastening; mounted on a sublog; є light indicator; daily fastening on the wall. | |
| China | Electrical | Max heat intensity - 1500 W; singing the application with an area of 20m2; equipping the above mechanical carvings; є mozhliv_st stіnіnnogo montаnіє, scho zaoschadzhuє prosіr; low noise level; heating swede; attractive design; thermostat daily; when heated, dry repeatedly. | |
| Ballu BEC/EZER-1500 | China | Really | Intensity 1500 W; scorching application up to 20 m2; є temperature regulation; when overheated, it turns on independently; noiseless robot; yakіsne folding; zruchne electronic keruvannya; installations of an ionizer; easy to install on the wall; corps of water protection. |
| Ballu BEP/EXT-1500 | China | Really | Intensity 1500 W; scorching application up to 20m2; when overheated, it turns on independently; є zahist in frost; bracket for fastening; heating swede; silent robot; є remote controller; vimikach with a light indicator; operation design. |
| France | Really | Intensity 2000 W; scorching application up to 25m2; equipment with a thermostat and frost protection; heating swede; silent robot; lightness at keruvannya; waterproof building. | |
| Alpine air NGS-30 | Turechchina | Gas | Attenuation 3.75 kW; scorching application up to 40m2; repeatedly heat up the palnik; the possibility of setting temperatures up to 38 ° C; handy mechanical control and complete set; combustion products are injected through a coaxial pipe; pratsyuє on shrіdzhenomu paliva. |
| Karma Beta Mechanic 5 | Czech Republic | Gas | Pressure 4.7 kW; scorching application up to 50m2; the safety of the robot and the safety of the combustion chamber is closed; steel heat exchanger heats up quickly; є fastening on the wall; wide range of temperature regulation; high KKD; silent robot; є p'ezorozpal; works on natural and compressed gases. |
Best Models 2017
Choice of editors 
10 super
8 good
6 medium
5 could be better
4 higher than average
| Krajina virobnik | Proposed models | Features |
|---|---|---|
| Finnish | ENSTO | Unique increase in reliability, suppleness, comfort, energy efficiency and safety; ease of maintenance; warranty - 5 years. |
| Norwegian | Nobo | Absolute noiselessness; equipped with an electronic thermostat; do not burn the kiss; safe electric heating panel with emergency switch-on system; fire safety; awesome design; uninterrupted work resource - 25 years. |
| Middle Ukrainian | "Termia" EVNA, "Termia" AOEBP3 Flamingo | Restored at apartments, offices; price |
| Parameters | Oil heater | Convector |
|---|---|---|
| Economy | Low economic | Save 25% |
| Environmental friendliness | Rahunok convection powder | |
| Bezpeka | Large t surface, є ymovіrnіst vibuhu in case of broken rules of operation | On top of a strong heating is not allowed, you can leave it without seeing |
| Comfort at Vikoristanni | Middle | Zruchni and podlogovі, that nastіnі |
| Heating hour | The primary models heat up for a long time | Appliances heat up for a long time |
| Service lines | Middle | Great |
For the succession of factors of the whiskers, the convector will ask for itself, obviously.
Advantages of convectors in front of other scorching outbuildings:
Mіkatermіchny obіgrіvach 
Fan heater Electrolux EFH/W-1020 The fan heater is not hot and does not cut for other opalyuvaln_ attachments.
Electric boiler Protherm Skat 9 KR 13 
Thermal Garmat Timberk TIH R2 5K 
Quartz heater AEG IWQ 120 Electricity and gas are used for the heating method.
Ceramic heater ( hot characteristics) |
|
Gas ceramic heater |
|
Electric ceramic heater |
|
Air curtain Thermor Evidence 2 Elec 1500 
Infrared heater UFO Line 1800 When choosing a convector for a house, for a summer house, for an apartment, the following criteria should be followed:
For a wooden booth, a convector scorched electrically, or gas-fired. Installation of a gas convector is more expensive.
For a lazna, it’s better to look at two types of singed, fallow in roztashuvannya lazni:
Offline function:
To save, at the garage you can conduct a scorch for additional gas.
IMPORTANT! Here it is necessary to connect to the central line, and allowed the authorities, and the execution of the necessary documents.
At autonomous burning vikoristovuyut gas, solid fire, electricity, vіdpratsovane machine oil.
For heating, convectors, gas panels, ceramic stoves, thermal harmonics and UFO are installed.
A portable electric heater will appear at the garage as a viable option. What should be done with respect when installing heaters in garages?
The hour of installation of the heater in the garage, subbyte, at the occupant
oil, combustible, lacofarb warehouses and easy-to-borrow materials.
| Model | Description |
|---|---|
 |
Three heating modes: economical, comfortable, express heating; regulation mechanical thermostat; on the panel, there is a special Comfort indicator; є repeat ionizer; sensor for protection from falling; economy; superficiality; noiselessness, which does not accumulate drank; do not dry repeatedly; high class of water protection. |
 |
Three stages of sweating heat; equipment with a mechanical thermostat, a monolithic heating element; mozhliva nastіnna that podlogova installation; zahist from the fall. |
 |
Effectively heats premises up to 15m2; sensor for protection from falling; two modes of tension 900 and 1500 W; in the complete set - support legs and wall fastening. |
 |
Vykoristovuetsya for heating small premises of office and butovy designation (10m2); mozhliva podlogova and real installation; small wag. |
| Model | Description |
|---|---|
 |
Hopeful; equipped with an electric fan; Primus conversion system; housing made of galvanized steel; pofarbovaniya wear-resistant powder; cicada design; compact dimensions. |
 |
Two series "Standard" and "Comfort" are supplied; all parts of the body are made of high-yield galvanized steel sheet; stuffed with powder wear-resistant contaminants; hull znimny; t does not exceed 40°C; high efficiency and low heat exchanger inertia. |
 |
with primus convection, tangential fans; at the heat exchanger - electric heating elements; equipping with a microprocessor smooth controller t heating elements and fan speed; є the ability to work in the "manual mode". |
 |
Internal convector with natural convection; zastosovuetsya like dodatkove zherelo singed, or for small needs of the scorched; convector chute - made of high-quality galvanized steel and black polymer coating; in the kit - crepe legs. |
 |
Internal convector with natural convection; low inertia; economy; compact dimensions. |
 |
Internal convector with natural convection; it is easy to wake up at the pіdvіkonnya; ideal as an additional opalizing attachment from various opalizing systems. |
| Model | Description |
|---|---|
 |
Take care of the heat of the room; pressure 2 kW; may have three degrees of heat intensity; zahist from overheating; compact dimensions; small vaga; the set has legs for installation for the pidlog. |
 |
Electric convector; stop by the apartment, office, deputy house; arrogant, careless; high rіven zakhistu vіd freezing place; noiseless robot; shvidka heated; the most important indicator of environmental safety; case temperature is low. |
 |
Electric convector; zastosovuєtsya at the apartment, dacha, zamіskom booth; may have a bimetal thermostat, a string heating element; protection from overheating, from freezing, from trapping in the middle of objects; noiselessness; daytime unacceptable odors; saves kissen; shvidke warming up the place; low t body. |
 |
Vykoristovuetsya for heating the premises with an area of 10m2; high brightness; superficiality; equipment with X-shaped heating elements; electronic panel with displays; timer; zahist from opikiv, strum attack, from a hit by a dribbling smitta and water; in the kit - pіdlogі nіzhki with kіlіshchatki and nаstіnі kіplennya. |
| Model | Description |
|---|---|
 |
Electric heater; at the principle of work - natural convection and equal distribution of heat; adaptation to voltage drops from 150 to 242; є auto-restart function; ІІ class zakhistu; digital graduation thermostat ASIC®; economy; zahist vіd brizok vodi; in the complete set - lowers with collars. |
 |
Electric heater; max high CCD; equipment with RX-Silence Plus® heating element; high speed warming up; do not burn kissen; noiseless; careless; є electric plug; visible voltage drops from 150 to 242; electronic automation; є auto-restart function; zahist vіd brizok vodi. |
 |
Electric heater of convective type; warmly rozpodіlyaє equally; at the principle of work - natural convection; arrogance, safety; electronic automation; shvidka heated; ІІ class electrozakhist; zahist like a breeze. |
 |
careless; visible voltage drops from 150 to 242; equipping with ASIC electronic digital thermostat; daily hospitality kuti; keep the temperature accurate to 0.1°C. |
| Model | Description |
|---|---|
 |
Vykoristovuyutsya for warming the place at the living houses, apartments, cottages, offices, shops, great places; equipped with a steel heat exchanger of wet construction; ringing and in the middle covered with a ball of enamel for protection from fire and fire; special gas valves EUROSIT and MP regulate t in the range of 13-38°C; є p'zoelectric disintegration; low semi-luminous palnik made of stainless steel; zahist from overheating; noiselessness, environmental friendliness; Simple installation. |
 |
The model was introduced to the sublog; shvidka heated; vykoristovuetsya in heavily soiled areas; create a thermal curtain against falling streams of cold air, including fogging of windows and windows; in the summer period, they can vicorist for light air conditioning. |
 |
Vykoristovuyutsya for warming the place at the living houses, apartments, cottages, offices, shops, great places; allow to heat the premises with a total volume of 50 to 120 m3; equipped with a steel heat exchanger of wet construction; ringing and in the middle covered with a ball of enamel for protection from fire and fire; special gas valves EUROSIT and MP regulate t in the range of 13-38°C; noiseless, superficial, absolute hermeticity of the combustion chamber; ecology; the presence of the thermostat, which is between. |
| Model | Description |
|---|---|
 Ballu Camino BEC/EVM-1500 |
Monolithic construction; noiselessness; high CCD over 90%; heating swede; two robotic modes; total visibility of heat losses; do not overdry; do not burn kissen; installation of the Double-U-Force heating element. |
 |
Vykoristovuєtsya for heating the application of a different type; equipment with a high-precision electric thermostat; full and half tightness mode; є sensor for overheating, overheating, brizok; innovative system of equal convection Homogeneous flow; simplicity of keruvannya, vіdminny design. |
 ENZO BEC/EZER-1500, BEC/EZER-1000 ENZO, BEC/EZMR-2000 ENZO |
Heating area 25m2; heating intensity 2000 W; mechanical curing; regulation t; zahist v_d overheating, vіd vologa; repeated ionization; waterproof building. |
 |
Intensity 500 W; pratsyuє vіd vіd prugi zhivlennya 220 V; mechanical curing; є thermostat, vologozakhist. |
| Model | Description |
|---|---|
 |
Intensity 1500 W; heating area up to 24m2; heating element made of aluminum alloy; electronic keruvannya, touch panel, two modes of operation; equipment with electric thermostat, timer; digital display, switched on indication, protection against overheating, freezing, overturning; at the set of wheels. |
 |
Intensity 1500 W; heating area up to 24m2; heating element made of aluminum alloy; mechanical type of carving; three robotic modes; mechanical thermostat; metal case; zahist from freezing, overheating, perekidannya, brizok; at the set of wheels. |
 |
Max power 2000W; heating area up to 25m2; є mechanical thermostat; X-like aluminum heating element; do not burn kissen; zakhist from overheating. |
 |
Intensity 1500 W; heating area up to 24m2; mechanical type of carving; two robotic modes; metal case; zahist vіd overheat, perekidannya. |
|
Max pressure 2000 W; heating area up to 25m2; mechanical curing; X-like aluminum heating element; do not burn kissen; high speed work; complies with IP24 security class. |
 |
Max power 2000W; heating area up to 30m2; heating element made of aluminum alloy; mechanical curing; three robotic modes; metal case; zahist from the brizok, overheating, freezing, overturning. |
 |
Max pressure 2000 W; heating area up to 25m2; mechanical curing; X-like aluminum heating element; thermostat, metal housing, protection against overheating. |
 |
Max power 1500W; heating area up to 24m2; mechanical curing; є regulation of tightness; zahist from overheating; corps of water protection. |
| name | Krajina virobnik | Features |
|---|---|---|
| Nobo (Nobo) | Norway | Electric convectors are used for heating private booths, apartments, small offices near wooden booths; equipped with automatic support t; zruchne keruvannya; do not burn the kissen, do not dry it again; convection is smooth and uninterrupted; can vikoristovuvatsya in watery applications; body of water protection; povna bezpeka; no noise, easy installation. |
| Akor | Ukraine | Really; vykoristovuyutsya and in residential and non-residential premises with an area of heating up to 40m2; Chavunny heat exchanger; safe. |
| Іzoterm | Russia | Efficient for whatever the temperature of heat transfer; safe; equal heating of the place; good design; great choice reconciliation; details are not strong to corrosion; trivalent term of service. |
| Hosseven | Turechchina | Designated for the heating of small premises, cottages, apartments, cottages, warehouses and warehouses; safe, frost-resistant; ease of operation; you can try on rare gas |
| Alpine Air (Alpina) | Turechchina | Really; Chavunny heat exchanger; vikoristovuetsya gas fittings SIT and POLIDORO valnik; safe; є p'ezorozpal і thermostat; telescopic pipe; you can try on rare gas |
| Kermi | Nіmechchina | Sublog; with a screen of thermal vibration; convector made of steel straight-cut water pipes with plates made of rose-coloured steel; a small hour of heating to exit the operating mode; Possible installation on the wall. |
| Resanta | China | Characterized by simple keruvannyam; on the front part of the body - a pressure switch and a mechanical thermostat; the set has support legs with collars. |
| Ensto | Finland | Electric convectors with mechanical and electronic thermostats; they are installed at living and non-living places; razrobleno for work in the minds of trivalo exploitation; not weak to corrosion; six nominal pressures for the use of different recognition and expansion; quick installation and connection; safe; low surface temperature; do not burn the saws; Electronic thermostats operate absolutely silently. |
| Karma | Czech Republic | Gas convector, which does not require connection to electricity; p'zoelement; with a visible process of burning on a stone fireplace; do not burn kissen; steel heat exchanger hermetic; noiseless; the next step is to defend; the ability to work in the main and compressed gas. |
| Itermic | Russia | Vnutrіshnyopіdlogі, yakіsnі; the heat exchanger is stacked from horizontal copper heating tubes with aluminum lamellas, planted horizontally on the heating tubes; coating the beast with powder furboy RAL9005; high dynamics of heating; resistance to corrosion; ease of installation; pratsyyut vіd systems of central water scorching; can be adjusted in manual and automatic modes. |
| Roda | China | Electric convector; quiet heating; do not dry it out, do not burn the kiss; elegant design; accuracy of the trim t; Simple installation. |
| Eva | Russia | Proponuyutsya with a fan and without, pіdlogі and stіnіnі, parapetnі; adaptable to systems of central scorching, safe, noiseless, superficial, high brightness. |
| Atlantic | Ukraine | Victory for heating living quarters, offices, rooms; noiseless; fasten to the wall; possible and pidloge installation; models are promoted with infrachervonim viprominyuvannyam; bezpechnі, nadіynі, corpus of water protection; high rіven zakhistu IP24; do not dry repeatedly. |
| Termex | Russia | Heated premises up to 20m2; є thermostat, protection against overheating, three equal security systems, quick heating; the case does not heat up; they are installed on the sub-log, and on the wall. |
| Verona | Poland | Internal; vіdmіnna thermal conductivity of the material; aluminum heat exchanger; natural convection; max heating temperature 90 °. |
| Tremor | France | Electric convectors; shvidka heated; safe; proponuetsya chotiri model rows; mechanical curing; simple installation; lung keruvannya; zakhist from overheating. |
