Vimicach is used as the main tool that helps in the management of lighting. Today, you can see it as wide as it is: single, double and triple. The remaining type of assignments for connecting a number of lamps, that is, combined lighting.
Triklavishny vimikach from a rosette, unimportant to hand when keruvannya, mount rarely. Scheme of connection of a three-key switch with a folding socket, a lower level one, and even contacts, which go to the lighting fixture in three rows. This block has a lot of functions and takes up minimal space, so there are three outbuildings in one building.
The socket is a chain of attachments. Wanting to get it out of stock in one building, but working on its own. "Zero" from the pink box goes to it, and the "phase" is connected to the jumper of the vimikacha.
The middle of such a three-key switch is seen:
The installation of a three-keyboard vimikach is necessary for:
As a security unit with a socket, the wines are the most functional.
The model range of blocks is different, always possible to know the vibrancy that is suitable for the interior. Such extensions can be upgraded with functionality.
According to these criteria, they are subdivided into:
Get respect! Under the hour of choice, it is necessary to visually look at the vibr. It's not the fault of the mother of the bully, the scuffs and the poshkodzhennya. When peremikanni keys clattering felt.
At the annex there are self-tightening lemi. The stench is necessary for fixing and connecting wires. When vismikuvanni lived (which is categorically fenced), special clasps-zatyskachi go out of tune.
The use of impersonal models of a three-keyboard vimikacha with a socket, but the connection remains unchanged. The next block arrives the same way, as a single or a sub-model. The cable of life is connected from the entrance of the building itself, and lived to pass through the contact of the block with a mic to the light bulbs. I'm guilty of zbіgatisya with the keys I will add.
Basically, the socket is provided with a zero-point wire and, according to the scheme, it is not tied to a vimikach, but the stench may be a wild "phase". All "zeros" in the lamps and the same sockets are connected to the socket box. "Phase" to lead up to the infamous contact, to enter at the vimikach. Carry out the lighting on the same blocks. The voltage itself is transmitted to the light bulbs. On the ends they lived with insulation, approximately 10 mm. So, as the contacts are tightened with zatiskachami, and the conductor can be zlamatisya, such an attachment will not let it stand.
Basically, the block of vimics is fixed on the wall, in a special niche. For these purposes, zastosovuyut suporti or rozpіrnі paws, and the animal is put on a decorated frame.
Sound vimikach from the keys and install the wall of the room doors with a socket. The block helps to change the lighting and connect different accessories, like zastosovuvaetsya for the bathroom or the toilet.
Free box May 5th day. The grounding wire can be connected to the socket. Since the lamp has metal parts, it is necessary to protect it from the strum. For tsgogo є spetsіalne z'єdnannya pіd gvint.
There are two main schemes for connecting a triclavic vimikach, and in one it is necessary to have a separate box (for twisting the wires), and in the other one - a connection for a roztashovane in a block for vimicachiv. Let's take a look at the okremo skin scheme.
How to correctly connect the triclavish vimikach from the socket in the right direction? The basic rules, which must be followed, look like this:
On a note. Dismantling the transfer of the old vimikach, cleaning the wires and wires, re-wiring. Tilki poslyat tsgogo pochinayut installation of a new annex.
Before the cob, they work the cob, at the time of the application for help, the vimikach is torn N or L. In the main, there can be a "phase". If it's not so, then from the box under the lamp go "L". To the very same, vimikachiv is given zero. In such an incorrect variant, rosettes with a block of vimics N and L are replaced by months.
Let's look at how to connect the block with a socket without a middle. Under the hour of the dismantling of the old university, 8 darts will appear. Like the stink of one color, then roar like this:
Important! Such a scheme may be short: twisted "null" conductors, as it is necessary to close them in a block of vimikacha with a socket.
Somebody asks how to connect a three-key switch with a socket, so that the robot was vikonan properly, and everything functioned correctly. Often, when you connect an outlet block with a switch, something goes wrong, as a result, the chandelier does not work.
Let's look at the pardons, which can help mothers with the connection of outbuildings:
Zdebіlhogo spozhivach rob vibіr on the melancholy of the aesthetic model, all fall in line with the design of the interior near the apartment. As the design is "for the old times", then the choice is the next zupinity on the models of the firm Fede.
A potryny vimikach with a Gira rosette of ideas with a vishukakim design that can be a great drink. Models Legrand vіdmіnno poddhodit to any kind of interior, to that scho can be horizontal and vertical vikonannya.
The ABB company supplies to the market a great range of vimicacci blocks with a socket for light-emitting diodes. The stench gives functionality to aesthetics.
Russian virobnik "Kuntsevo-Electro" produces combined models. It is possible to grind a single block, made of plastic, with a vertical installation. Models with additional vimics and a socket are used: without a contact for grounding, with a red light or with a euro socket, which can cover the curtains.
Important! The voltage must be set to 220 V, and the nominal voltage should be set to 10 to 16 A.
Vimikach of such a virobnik, choose the buyer himself.
So carry out the installation of the triclavish vimikacha from the socket independently. I don’t know how to work at my right hand, rather turn to fahivtsya. Vіn not only zrob everything quickly, but also choose the best outbuildings, please, de їх montuvati, and revise all the electrics at the apartment.
Wimikachi is the main fixture for lighting lighting. The largest extension is single, but it is necessary to turn the dekilkom with lamps from one month, two triclavishes should be installed. The photo below shows a triclavish vimikach with a socket.
Triklavishny vimikach with a rosette on the wall
Potrіyny or triklavіshny vimikach appointments for switching three groups of lamps. There may be combinations of the lighting method, de-point lighting from the central one, groups of lamps at the chandeliers, different levels of plasterboard, inclusion of light at the bathrooms, corridors, toilets. Yogo worry like this:
Variants of the victoria of rich-key vimics:
Before them also add an outlet. Attached as a block becomes more functional.
Oskіlki vybіr dosit great, you can know the appropriate interior model . Attachments also differ functionally:
There are no faults on the case of virobs, but there are scuffs, scuffs, abrasions and other ears. The keys are easily connected to the characteristic clatters, and the cleats are easy to fix when they are connected. Nadіyno pratsyut samotaknі klemy, zruchnіshі v vikoristanny. It is enough to insert the wire in the open, and there will be fixings. Here it is important to competently yogo viimati for consumption. For this, the annex has special studs, which are fixed. Yakshcho vismikuvati prіd z otvoro, roz'єm can get out of tune.
Scheme for connecting vimikacha to fall into type. On the back I will add a diagram of yoga contacts. How the stench connects to the lamps, you can see the little one.
Scheme of connecting a three-keyboard mic
At the bottom of the box, bring the darts of life: blue zero (N) and brown phase (L). To zero, 3 darts of light bulbs are connected. Phase ide vimikach, de-connected to clemy (L). Three contacts of the vimikacha won't go to light bulbs, flickering their lances.
Vimicach is always inserted at the phase opening, and not the zero one.
Regardless of those that the connection scheme is simple, it is necessary to take advantage of the advanced technology for installing vimicach:
In the apartments of the old building, double-keyboards were installed to turn on lighting in the corridors, toilets, bathrooms and kitchens (in various combinations). If there are not enough darts, in order to install a third block, you will have to lay them additionally.
Okremі podvіynі and potrіynі vimikaі can be installed for bathrooms and kitchens of great sizes, de mozhe buti dekіlka of lighting zones.
As soon as the triclavish vimikach is installed from the socket, the scheme of the yogo connection is suspended by an insignificant world in the front. On fig. Below are images of two different designs of a three-keyboard vimikacha (a - BVR3; b - BSU3), the electrical circuit is the same (c). Live on the contact plug (5) of the socket is fed through the core of the zero conductor and the phase that is connected to the auxiliary jumper in the block.
Scheme of the block of a three-keyboard vimikacha with a socket
Position 1 is the case, 2 are the buttons, 3 is the screw, 4 is the cover, 6 is the vimicach contacts.
Vimikach with a lot of keys and a socket ringing is installed in one place - the white of the doors of the bathroom and the toilet. The block gives the possibility to turn on the lighting and to conduct the connection of an electric razor, hair dryer, etc. priladіv, scho zastosovuetsya at bathrooms.
Scheme of connecting to the block of a double-keyboard vimikacha with a socket for resuscitation and input
At the rose box, fight 5 days (Fig. above). Here, a green color ground wire has been introduced, which is more suitable for the outlet. On a lamp with parts of metal, there is also a need for protection against a strum attack. For which, on the metal case, a z'ednannya pid screw is installed.
When you open the models of a continuous vimikacha with a socket, the connection scheme is filled with the same one (small below). The block is connected in the same way as single or sub-models. I’ll build a life-giving cable through the entrance, and the darts go through the contacts of the vimikach block to the lamps, which run for a few keys.
Schematic diagram potryyny vimicach with a socket
The socket may be zero-wire wired for the circuit, it is not connected with the vimikachem. They don't have a wild phase. All zero wires for lamps and sockets are connected in a rose box to a life-giving neutral. The phase is brought up to the wild contact of vimicach. Contacts for lighting sections are located at the nearest well. From them, the voltage is supplied to the light bulbs.
10 mm insulation is visible on the ends of the wires in front of the connections. For the purpose of joining, tighten the tips of the НШВІ to a full extent, so as not to let the rod break off when tightened with the clamps.
The block is fastened in the niche walls behind the help of rozpirnih paws or supports, after which the decorative frame is dressed on the new beast. Methods of strengthening can be the most manipulative.
It is rich who chooses to use vimikaci, who walks from the aesthetic mirroring. As the room is framed according to the old days, Fede models are suitable here. Gira's German brews can make a great design and make a great drink. Dobre podlashtovuyutsya pіd іnter'єr model Legrand, horizontal or vertical vikonannya. Great choice Vimics are provided by ABB. Vyrobi zі svіtlodiodnim pіdsvіchuvannyam, scho add to aesthetics functionality.
Combinations of vimikaci in the preparation of the virobnik Kuntsevo-Electro. The block made of metal plastic is used for vertical installation near niches on walls. The following models of potrynyh vimics are issued from the socket:
Three-keyboard vimikachi with socket
Vimikachi mayut such characteristics: voltage 220 V, rated jet input 10 A. Models with rated jet 16 A and with grounding contact are produced by NVO “Elektrotekhnika” (models BZVRzk-S “REONE”, BZVRzksh-S “REONE”).
About the installation of sockets and the replacement of the combined block BKVR-039, you can report on the video below.
The potryny vimikach from the socket rarely zastosovuetsya, ale vin zruchny, if you need to keruvate a kіlkom with lights from one point, you need to connect electric appliances. The block is richly functional and takes up little space, three outbuildings are combined in one.
The connection of the triclavish vimikach is troch folded, lower one-key. The difference is that there are three contacts to light bulbs. The socket to the block works like a lock, and a zero wire comes up to it from the socket box, and the phase is connected through a jumper to the vimikacha.
In order to save a little bit of electricity, as well as to carry out lighting with different equals in one month, a three-button vimikachi light was created. Stinks often vikoristovuyut at houses and apartments, tk. deisno zruchnі and simple in coristuvanni. Connect a new model folding more than a single one, so in this article you are given a video and a photo, as well as a connection diagram for a three-keyboard vimikacha light.
Lyudina, without noticing it herself, the victorist's wife was richer in light, the lower one was necessary for real. That rіven illumination, scho vіn mimvolі vykoristovuє, may be vdvіchi smaller. If a person ceases to take advantage of the demand for electricity and the use of non-consumable light bulbs, then save up to 30% of vicarious electricity. The same for these vipadkіv i zastosovuєtsya potryyny vimikach, images in the photo below. The connection of the triclavish outbuilding is connected, as a rule, to the chandelier for keruvannya, whether it be some kind of lighting: decorative, basic, and supplementary. Most often, the main lighting is victorious;
So often the connection of the three-keyboard model of the vicorist is for the lighting of different rooms in one month. For example, you can install a replacement model near the corridor, to turn on the light in the kitchen, bathroom and toilet, or replace the kitchen in the corridor itself. Even better, and before that, such an idea allows you to save on electrical installations (there will be more than one replacement).
Also, the connection diagram of the three-keyboard vimikach looks like this:
There are six darts from the light bulbs to the bottom of the box. Three of them connect with each other and connect to the zero conductor (the whole working zero goes through the shield). Those three darts from the rozpodіlnoї box, which were left unfinished, are put together with the accessories. Then, from a separate box, it is necessary to turn on the phase, as it will be the same for three lights. The connection is connected to vimicach. As well as the grounding, yellow-green darts in the lamps, it is also necessary to get close to each other. All orders are recommended to apply for help.
This circuit clearly shows how you can connect a three-key type of vimikacha and how when the contact is closed, the light bulb lights up:
Triklavishny vimicach z inner side looks like this: on the body it is reported and shown, where the next step is to apply the skin rash and where to enter the phase. I’ll attach the diagram in the back looking like this:
The video instruction shows how to turn on the third vimikach light to the edge:
A third attachment can be used for this principle: connecting one lamp to the first key allows you to turn on the first light, the other key - two lamps, and the third one turns on additional lighting at the visible sconce. This connection allows you to combine lighting in the room up to seven views and you can use one three-key fixture.
Also, there is a pottery rozchiplyuvach, a kind of accommodation with a socket in one building. The heads of such a design can be spared for the installation of electrical wiring, the fragments of the robot are concentrated in one place. The connection diagram of a three-keyboard vimic with a socket in one case is shown below:
Such a scheme may have little visibility in the front. The difference lies in the fact that in this case, a zero wire is added, which type of a separate box goes to the outlet. This variant of vikonannya zastosovuetsya in the rooms, de rosette vikoristovuetsya infrequently, for example, near the bathrooms.
Suitable(0) Not suitable(0)
The rest of the hour in order to rationally switch the electrics, many people plan to turn on the three-key switch. With this help, you can easily cherubate parts of lightening. It’s no longer necessary, so that all the bulbs burned at the same time. If necessary, now you can increase the lighting in your zone, if it will be necessary. To implement this process, you need a three-key vimic.
From this article you know how to connect the triclavish vimikach. For you, we have posted about yoga attachments and that connection scheme.
On this day, a lot of people vicorist at their booth a great number of lights. Їhnya kіlkіst іnоdі y udvіchі can outweigh the needs of the people. After the investigation was carried out, it was clear that if a person stops lighting the lamps, then you can save the electrician by 30%. From the other side, the triclavish vimikach allows the build-up of booths to be significantly more comfortable.
Attachment of the triclavish vimikacha to finish it simple. And yet, with its simple design of wines, it allows you to solve more problems. With this help, you can divide your accommodation into sprat zones that are hanging. Zavdyaki youma include additional lighting you can only for the need.
The connection diagram of a triclavic mic can look like this:
Like a bachite, behind the scheme to the pink box, six wires are included. Three of these darts may rattle among themselves. After which dart you need to connect to zero dart. Three darts, yakі to get rid of, it is necessary to bring to vimikach. May I follow the scheme.
If you turn the triclavish vimikach backwards, then you can talk, what is written there, where you plug the darts. In case of wire transfer, please review the instructions of the vimikach. If you mix up the darts, lighting may be wrong. Sound on the three-key vimikachi, from one side, turn up the entrance phase. On the other side, there will be three weekends, as they will go to the outbuilding of lighting.
Even though you have three dzherel svіtla, then with the help of that vimikach you can organize these different combinations of lighting.
When yoga is connected, it is necessary to chirp at the moment, like connecting a three-key vimikach with a socket in one case. Zavdyaki this type of connection you can significantly save your time in the process.
Tsya scheme practically does not fit in any way in front of the front scheme. Vіdminnіst scheme polagatima only in the presence of an additive zero drotu.
A triclavish speaker with a socket will be true in that case, as your booth has electrical wiring. to help the vikoristanya of this vimikach.
The selection of the triklavish vimikach is less than your favors. But when choosing yoga, you need to pay attention to the following details:
At panel booths, triclavish vimikachi with a rosette are widely vicorous. The stench is to stand by the corridor and look out for light in three places - the kitchen, the bath room and the bathroom. The socket here is provided for everyday needs, for example, to turn on the saw, a razor, a hair dryer, etc. Quiet feast, if the stench was restored, a good hour has passed, and today the stench will require replacement. It’s not easy to buy such a three-keyboard switch with a socket, but you can’t buy an axis with a yogo connection scheme. In this article, I will detail the scheme for connecting a three-keyboard vimikacha with an outlet, with which you can do everything independently.
Before the cob u sіh robіt obov'yazkovo znestrumte the apartment abo qiu line. Bezpeka need a mustache.
Before the hour of dismantling the old block, remember, and rather, sign all the darts, as if you were turning it off. Let me allow you to sort out some kind of wire and where to go. In two words about droti - the sense here is this:
I think that the explanation is not enough, having painted over the connection diagram of the triclavish vimikacha from the socket, having written everything in a report. Here you give respect to the painted lines and do not particularly give respect to the bunch of darts at the block, to the one who is self-made here and the landlords of the apartment have powered one more socket. Look below...
In the photo, a plastic box is already installed in the wall, like a new three-keyboard vimikacha with a socket. Vaughn will definitely enter at the graveyard of the grave in the sight of an old vimikach. You can put it on plaster, or you can attach it with dowels. Here the choice is yours.
The axis below is a photo without my art. This block should be at the apartment in one of the homelands of pensioners. The wiring here is old and I didn’t want to smell the stink in any occasion. Part of the wires of the bula was broken and the stench was built up through single terminal blocks. They gave a lot of yellow-green wiring - the same "zero" conductor that goes to the outlet, mounted in the kitchen (it's already self-made as an electrician).
Lower already placed on the floor of the jumper. You can’t know for sure, because access to the contact bolts is the same.
I took them out of interest...
Now we put the body on the floor. Vіn krіpitsya three bolts.
Let's put a key...
Now another key...
At the final stage, we put the middle key. Axis and all triclavish vimikach іz socket ready for operation. In order to achieve this goal, you need to contact the contacts in the reverse order described here.
If the explanation is not enough for you, read the new material, which will add to this article: Addendum to the article "Scheme for connecting a three-keyboard vimikacha with an outlet". Here I look at two different schemes for connecting such a block and giving an explanation.
Smiling:
Teacher of physics - Vovochka:
- What will you do, how to insert a magnet near the cat and viimati yogo back?
- At lanceuzi vinikaє іnduktsіyny strum.
- Right! And what about the long time?
- Maybe an electrician will be born.
At first glance, the connection of a three-keyboard vimikacha can cause inconsistencies and confusion in a person who likes to mess around with electricity. Really, there is nothing coherent in it. If you have installed vimikach at least once, then you know that in a single leash there is one outer cleat, and in a rooted one - two. So the axis, the triklavishny vimikach, is deprived of it, that the new one already has three cleats.
It’s worth saving space on the wall, especially if such a vimikach is connected with an outlet in the case. Wait a minute, already manually vmikat / vmikati light from one month in different cubbyholes (in the toilets, corridors and bathrooms) or regulate the brightness of the light in the room with light bulbs, different lamps or lighting zones in one room / room. What, before the speech, will help protect electricity by 20-30%.
Before that, turn on the triklavish vimikach, obov'yazkovo znestrumte merezh, turning on the automaton of the lichnik. If you have access to the switches, put a note on the installation work.
For robot you need:
For the cob, you need to pick up a three-contact vimikach, so that you can get a yogo cle. It's easy to fight: push the thin keys themselves, and then raise the frame. Now let's take a look at the connection of a potry vimikach. Until new May, chotiri droti is coming. Tse mozhe buti vodrazu chotirizhelny cable, one vein as if it would be a phase. Wanting to more often zustrichaetsya vyhіd zі stіni single-core drotu - phase - and three-core order - for lighting fixtures. You can determine the phase for an additional indicator twist.
Connection to fight for only three kroki:
Get respect! At the entrance of the triclavish vimikach, only phase conductor is guilty of going! As a result, the zero voltage is interrupted, the light bulbs can also work, and even if the electrical wiring is lost under voltage when the position is switched off. Tse means that when you replace the lamp, it will be a risk of damage by a strum.
Seen at the vimikaci, it is fastened with pressing gvints. No more than 5-10 mm of insulation can be seen from the cable, so that there are no bare darts. As a rule, carry out a bagatozhilny, vikoristovyte special tips NShV, so that the veins do not break off when tightening the screws.
From i all. As a result, our circuit for connecting a three-keyboard vimikacha was chosen. It was left to mount yoga in the socket, open it with screws and install the place facing with keys.
Before speech, a variant of a multipolar vimikach with a socket can have the same scheme. Vіdminnіst less at tsomu, scho at the socket is supplied with zero wire, and the phase is bright. It can be connected both with parallel cables (okremo to the socket and okremo to vimikach), and one (by a jumper from the socket to the main contact of vimikacha). The little one below shows a diagram of another arrival.
Get respect! For installation on narrow walls and wooden surfaces, we use slips of vimikachi. So stink to go to the timchasovy vpadok.
Actual rules:
Get respect! To illuminate the long corridors, the descent of chi budins from the kilkom on top, let out triclavish walkways vimikachi. The stinks allow you to turn on the light in one area, for example, on the first version, and turn off - on the other. Wait a minute - it’s handy, even if it’s not necessary to sneak around the darkness and swipe the keys with your hand. It's true, the stench is connected to a little bit of it, but the topic is still a good article.
Not all models of third party vimics can be found in electrical stores. Є decorative (coloured, cherry, thin wood), moisture protection, protection from children, USB output, light-emitting diodes and many other options.
Let's be vimikaci, who rely on the current market of commutational possession, to differ among themselves as a familiar look, so to constructive vikonans, as if they can be stale in the transfer of minds of exploitation.
Triklavіshni (potryinі) pobutovі vimikachi, as a rule, vikoristovuyutsya in rooms with non-standard configuration, in the fall, if it is necessary to cover the lighting of dekіlkoh kіmnat from one node, or if there is a river in the surroundings.
The Danish type of vimics, by virtue of its design, gives the sings of a voice in front of the great two-key and one-key ones:
Knowing that this type of possession is often used, the middle term for the operation of such devices is 8-10 years and, as a rule, goes out of tune through mechanical (ruinuvannya case, crepe elements) and electrical (ruinuvannya contacts) breakdowns.
It should be noted that any type of malfunction should be caused to the point where it is necessary to replace the entire apparatus, so, before the speech, it may be carried out by a qualified specialist for completing all the rules of electrical safety.
Fig 1. The basic principle of connecting a three-keyboard vimikacha light
I use the nameless varieties of third-party switches, like in case with other commutators, the differences between them are found only in design and materials.
Іstotnykh vіdmіnnosti at the construction are not heard. Like all vimikachi, potryynyy folded from zahisnih elements (frame and keys) and the working mechanism (driven keys). The keys and the frame are made of special three-layer plastic, the keys are designated for uninterrupted switching on and off.
The frame is attached to the mechanism for additional special braces, or for additional screws, the jumper itself is installed in the socket (like an internal vikonnanny apparatus) for the special rosettes. The main components of the working mechanism are the keys, to which the plastic keys and contacts are attached.
4 contacts were transferred to the potryny vimikachi, 3 of them go to the lamps and one to the wire of life (Figure 3). Contacts sound vikonanі z midi, comradeship picks up for the transfer of power to the struma in the wires.
Varto indicate that on the elements I will attach a vibrator to sound to induce special signs, including the working voltage and the allowable force of the struma. Until the speech, deyakі virobniki domagayutsya even more savings, poddnyuchi vimikach from the outlet in one case.
Malyunok 3. The design of the vimic
Let's guess, the use of a three-button vimikach may be sensible in areas with a large number of zones and lighting levels. Irrespective of the insignificant details in the design between vimikachs with one and the same keys, the important role is still played by the correct connection of the device.
In order to include descriptions of lighting switches, a small set of tools and materials is required, which includes:
It is possible that from the fact that 4 darts can come to the vimikach himself without any interruption: one life-giving (phasic) wire from the underside of the shield or box and three darts from lighting lamps.
The described extension, as it was said above, has 4 contacts: one input, to which the life-giving phase is connected and 3 phase contacts of the lamps, to which the phases of the lamps are connected without interruption.
The zero conductor wires are connected with the zero wires of the lamps, either at the rose shield or, again, at the rose box.
When a wire is added to the input contact of the jumper, it is important to open the phase wire itself and not to confuse it with zero. As a matter of fact, connecting to the input contact of the vimikach zero wire, and creating a cim yogo opening, the device is necessary for the new robot.
Ale, in such a state of mind, it is not safe to be struck by a strum, and when the vibration is turned on, all the wiring will be under tension. It also means that when replacing the lamps, it went out of tune, the risk will be lowered under the pressure in that moment, if the lighting fixture does not come to the ground circuit.
Below is an important scheme for bringing a potry vimikach to the border. The connection of this type, which is controlled by the owner, is regulated in the main document of electricians - PUE.
Figure 4. Principal diagram of connecting the vimikacha light from three keys
Triklavishny vimikach of light of appointments for keruvannya tromma by contours of illuminating. Moreover, in the skin contour, there may be a number of light bulbs - one, two, three and more.
The connection must be repaired from the connection of the wires to the switch at the mounting box. And for this yoga, it is necessary to pick up the arm.
Connecting wires to vimicach
Know the keys from the vimikacha. You need to start from the central one. Sound under it - a gap. Insert the twists into the new sting and click the key with a small sting. 
Others can be taken by hand without twisting.
Dali, from the sides, again with a twist, pry off the fixators and pull on the decorative overlay. 
It is guilty to leave the central part of vimikacha with chotirma contacts. One to the beast and three to the bottom. 
Do not make the upper contact, it can be loosened in the center, leave it on the left. 
On this single terminal, the blazing phase conductor of life is to blame for the junction boxes.
Up to three lower ones, darts are connected, which go to the light bulbs, so on the edge of the circuit No. 1, No. 2, No. 3.
For connection, you need a 4-core cable VVGnG-Ls 4 * 1.5 mm2. From the soldering box in the strobe, lower the yogo into the socket, it is the fault of the vimikach.
After that, you fix the connection of the wires. 
A phase conductor arrives at the central central terminal. 
On the circuit that comes in, connect three lived to the lower terminals that are left out. Sob not to get lost at a distance, better to mark them. 
Insert the vimikach at the mounting box and fasten it there. Place the keys in the reverse order, starting from the last. Just lock them back to your place. 
Give respect to the roztashuvannya keys.
The correct position is taken into account, if the illumination turns on when the keys are pressed uphill, and flickers when pressed down.
Now it is necessary to work out the correct separation of all wires at the rose box.
Connection schemes
At the junction box, a sprat of cables may come.
First, the core cable of life from the lighting machine installed in the electrical panel. In a different way - a 4-wire cable, which goes down to the triclavishnik, which you have already connected from the bottom. 
Well, they can give you options. If you have one chandelier for 3,6,9 light bulbs, you can connect it with one single five or 4-core cable VVGnG-Ls with a span of 1.5 mm2. 
Well, if you have three independent lamps, in different parts of the room there is a booth, then you can pull on the skin of them along a 3-wire cable. Let's take a look at the remaining version of the report. 
Conveyance at the distribution box
Also, in a separate box you will have 5 cables. It is necessary not to get lost and to live correctly, they lived among themselves. 
For which plant, start the separation from the zero wires and the ground wire. Independently from a number of circuits and light bulbs, all zeros may be connected to one single point.
Those same stand and grounding conductors. On the lamps they are connected to the body. If you want to get into some kind of moods, you might not be. 
Naishvidshe z'ednannya alive viskonati through the terminals of the zatiskachi Vago. For navantazhen pіd osvіtlennya tse duzhe infidelity variant.
Try to choose zabarvlennya lived in vidpovidno up to chinnyh rules. Zeros are blue conductors, groundings are yellow-green. 
Pay special respect to those who don’t go to vimikach, but go straight to the lamp. Through the contacts of the triclavishka, an extra phase can be developed.
Lost connection of phase conductors. It is necessary to repair the phases that come through the cable from the entry machine.
Come and go only from the wild phase conductor, go to the central terminal of the triclavish vimikach and nowhere else. Tim himself, start the phase on the jumper.
Then send three darts that go out of the keys, with three phase wires of the circuits, which go out to the lamps. Rob the whole trio with different wago clamps. 
If you marked up to what you lived, then you can easily recognize it, like a key, like a light bulb will turn on (toilet, bath, front door, etc.)
With the correct folding in the rozpodіlch karbuvannі, it is guilty to go 6 points of contact.
Before applying the voltage without interruption, it is necessary to re-verify the entire circuit for connecting the 3-key switch. If you don’t get any pardons, then turn on the lighting machine and start your lamps with the keys.
Connecting a 3-key speaker and socket
The most frequent use of vimikach is to install one block with a socket. How to correctly connect such a connection?
First of all, you are to blame for knowing that for such an installation it is already necessary to twist a copper cable with a span of 2.5 mm2.
The cable of this cut is to go not only from the distribution box to the vimikacha, but also from the shield, to the center of the soldering box.
The cable 5 * 2.5 mm is lowered along the gate to the vimikach block + socket. Now, according to the new, it will be necessary to start not only a phase, but a zero. The hot phase conductor is more likely to be connected to the socket contact, the oscillators themselves on the lower voltage are more lower on the lamps. 
And then, with a jumper, let this phase go to the upper terminal of the 3-key vimikacha. 
Zero is connected to another socket contact. The other three darts, after the previously reviewed scheme, are wound up under the three lower contacts of the three-keyboard.
The separation of the wires at the soldering box is practically the same as the one that was looked at. For the blame of the fact that it is necessary to connect one more zero vein to the main point of zeros. 
Pardons pid connection hour
1 The most frequent pardon is the rosette, but the vimikach is silent.On the right, here you can be in the fact that you just mixed up the phase and zero on the rosette. I apparently launched a jumper on the vimikacha’s shackle terminal not a phase wire, but a null one.
For additional indicator twist, once again turn again where the phase should come. 
Often deyakі elektriki start okrem wiring on the socket that okrem on vimikach. As a result, your block can have two lives in one hour. If you choose the scheme according to the induced kerіvnitstvu, you can inadvertently create a short hiccup. 
Like only її vmikaєte, everything works like a requirement. Here everything is on the right at the wrong phase. You launched її on the output contact of the third key, and not on the sleeping input.
Well, I know that everything is being verified by the indicator.
Start reversing the voltage on the contacts, and the indicator twist instead of one phase shows three! Tobto, shine on all three contacts at the same time. How is it possible?
And the richness of the fact that the vimikach in his mood reveals not a phase, but zero!
The electrician, who himself had turned on the old vimikach a long time ago, is probably not guilty. Just a year, someone else throwing darts from a lichnik or a sleeping shield to your apartment.
Axis and it turned out that there, earlier there was a phase, having settled down to zero. Most of the time, it’s not easy to pick up from the shield buvay by the fitters themselves. 
When the indicator lights up on the contacts, the lamps are screwed into the cartridges. At the result, the lancet will appear closed through the roasting thread.
Turn the lamps and once again turn the phase conductors. Lightning on three phases may occur. For correct connection here it is already necessary to know the deep zero and the same to put it on the central contact of the new triclavish vimikacha. 
And it’s best to find out the reason from the shield, asking a professional electrician to restore the normal power supply circuit.
5 Try not to connect the socket in the block through one of the keys.Bagaty is handy - having pressed the key, the light disappeared in the rosette. So not recommended. It is connected with this, that through the contacts of the socket, it is necessary to connect a tighter voltage, for example, a hair dryer 1.5-2 kW.
Aje, through it, you can still connect the trinary chi podovzhuvach! Vimicach's contacts on a strum of such magnitude and trivality are not covered by insurance. As a result, after one hour you will have a voltage in the whole block, so you don’t have to eat earlier.
Good afternoon, readers of the site. Three-keyboard mic connection there are few people who think about the connection of the double-keyed one. The difference lies in the fact that for a robotic three-keyboard vimikacha, a fourth wire is added to the circuit, which phase from the third contact will go to the lamps or some other way. Axis of principle and everything.
If you marvel at the connection of the vimikacha from the side of the gate, then you can see on the little one that chotiri droti is coming up to the new one. One dart each (for each butt of blue color) phase L come to vimikach, and three others (brown) L1, L2і L3 phase go to the adventure.
On the sides of the block of contacts of the vimikacha, there is a socket for connecting phase wires. Input phase L connected from the side of a single terminal, and external phases L1, L2, L3 from the opposite side, there are three such terminals.
Phase L 1 connect with the wire to the cable that goes to vimikach. Arriving before vimikach, the phase enters the lower yoga input contact and is on this contact postyno.
3 top output contacts L1, L2, L3 go with the same cable at the box, de at the points 2 , 3 , 4 connect with the wires to the cable that goes to the stele. Darts on the stele L1, L2, L3 connect to brown visnovk_v lamps HL1, HL2, HL3.
Zero N come in at the rozpodіlchu box and to the point 5 get behind the wire to the cable that goes to the stele. On the stele, zero is connected to blue visnovki lamps, connected to one point, satisfying hot visnovok.
When pressed, for example, the right key, the right contact is locked, and the phase is drotom L1 2 HL1 and sleeping lamp. Zero N(blue wire) for all lamps wild.
Remember. At the top contacts of vimicach, the phase consumes less muting to the contact of the second key.
Now, when pressing the middle key, the middle contact closes, and the phase is switched off L2 go near the box, de through the dot 3 and the stele wire is used on a brown lamp lamp HL2 and sleeping lamp.
So the very practice and leviy contact of vimikacha. And when three keys are pressed at once, the lamps of the chandelier light up.
Well, from, on principle, and everything you want to say. And as an addition to this article, I recommend reading the article about, de evidence, the principle of inducing an electrical circuit of a chandelier on any number of lamps.
Success!
