If the supply of water in the kitchen comes first, rejoice, then you are blessed. In this case, you can immediately do everything ergonomically and correctly - provide comfortable access to the system and a “dry” method of replacing the equipment. When connected to a ready-made installation, there is also a chance of not just installing a mixer in the kitchen, but also installing pipelines under the guidance of a better template. Today we are considering both the first and the other option.
You can complete all manipulations on your own, without the assistance of professional plumbers. You get two in one - you will get new skills and save your family budget.
Safety food:
Porada: plan the installation of pipelines in such a way as to minimize the number of connections.
Porada: the rule of the gargoy tone - the skin's water-bearing point is to blame but is equipped with a culo tap that overlaps.
Then you have the opportunity, if necessary, to block the required plot without disturbing the entire system.
Porada: one of the ways to choose the right mixer is to focus on the brand and customer preferences.
In both cases, the reliability of operation approaches 100%.
We encourage you to get acquainted with these little things that will help you in your future work. Here is the final result:
| Zmishuvach | To the main criteria of the trace, add those who are responsible for the directions to the center of the sink. Please pay attention to the complete set of the product, which includes a sealant and gaskets (humic, silicone or paronite). Check the warranty badge in the buyer's handbook. |
| Nuts | Increase your purchase price by the diameter of the clamp nuts and couplings. The standard option is 1/2″, if it is larger or you want to press the pipe directly to the main pipe, use the adapter. |
| Zmishuvach's nest | If there is a faucet in the bowl, turn it over so that the diameter matches the tap. For your duties:
|
| Tool | You need a minimum set - a screwdriver, pliers, 2 adjustable wrenches. It is recommended to stock up on WD-40 oil to make dismantling the old equipment easier. |
The instructions below can be applied to all foods related to the installation of the mixer on the kitchen sink. It is first recommended to cover the transfer area with packaging cardboard or other material so that metal parts that fall from height do not damage the coating or cabinet. If possible, stick the washcloth away from the wall.
Porada: since access to the storage room is only possible from one side, you can tidy up everything you need.
Call the wastewater disposal system.
In the photo - shut-off taps allow installation to be carried out without connecting the entire water supply system.
Pokrokov's robot looks like this:
Porada: has a strong structure and does not have an internal humic ring. Fixation is carried out manually without any tools. This is written about in the handbook for collecting possessions.
Porada: you can install the hoses before installing the mixer in the hole, but it doesn’t matter.
Connections, as you know, do not create anything foldable, the smut is the accuracy of the robot. It is impossible to carry out the first start of the system, which will provide evidence of ample power.
To do this, open the shut-off taps, and then through, and then at the same time, the cold and hot water taps. Look around the connection area and, if there is a slight leak, tighten the nuts. However, do not overdo it so as not to harm them.
Now let's take a look at some of the supplies associated with the repair of the equipment:
If the water supply in the kitchen comes first, you are lucky. This way, you have the opportunity to do everything correctly and ergonomically the first time - create comfortable access to the system and an easy way to replace the equipment. By connecting already before the finished installation, you have a chance to work not only on the installation of a mixer in the kitchen, but also on the installation of pipelines under over-insurance of a larger template. Below you will learn how to install a mixer in the kitchen, and for completeness we will show you a video of the process. As a result, you will understand the first and other options.
You will be able to perform all manipulations on your own, without having to rely on the help of plumbers. You get two in one - you get rid of the necessary skills and you can protect your family budget.
Safety food:
Respect! You are planning to install the pipelines in such a way that the distance between the mixer and the water pipe changes the strength of the connection.
Respect! The rule for a healthy tone is to have a water-filled point on the skin with a tap that turns off. This way, if necessary, you can shut off the necessary section without shutting down the entire system.
Features of preparation
We recommend that you get to know some things that can help you with future robots. Those who can achieve the desired result should lay their hands on them:
| Zmishuvach | To the main criteria, it is important to include those that are responsible for going straight to the center of the shell. It is especially important to check the completeness of the product, which includes gaskets (paronite, silicone or humic) and sealing material. Please check the warranty with your dealer. |
| Nuts | When purchasing a product, increase the diameter of the flour of the sticks and nuts. Standard option – 1/2”. If you decided to install the changer directly to the pipe or beyond, lock the adapter. |
| Zmishuvach's nest | If there is a special opening for the faucet in the tank, turn it over so that its diameter matches yours. In any case, you can add a wall-mounted version or drill a seat in a stainless or ceramic sink using special tools or directly to the store (as they provide such a service). |
| Tool | The minimum required set is pliers, a screwdriver, two adjustable wrenches. Radimo add some WD-40 to make it easier to dismantle the old equipment. |
Below you will find instructions to allow information on all foods related to the installation of the mixer on the mitcha. Beforehand, it is best to cover the work area with packaging cardboard or other material, so that the metal components that fall from height do not damage the cabinet or the coating. If you are in a position to do so, it would be better to take the mitta off the wall.
Respect! Since access to the storage unit is possible, including from one side, it is better to tidy up everything you need. As a rule, this is a wastewater disposal system.
Pokrokov installation
After you unscrew the old valve, you need to install a new one in its place. Let's give instructions to the children:
Respect! It is attached to the inner humic ring. Fixation is done manually without any tools. About this obov'yazkovo may appear at the helper's collection of possessions.
Respect! You can choose to install the hoses before installing the mixer in the middle hole, but it doesn’t matter.
Repair and startup of the system
As you make connections, there are no particular difficulties, it’s difficult to achieve a neat folding. All that is required is to perform the first start of the system, and to supply all types of power.
To do this, open the special shut-off taps, then alternately, and then the hot and cold water taps at the same time. Inspect the connection area and if there are minor leaks, you will need to tighten the nuts. There is no need to rush in such a situation, so as not to spoil them.
Now let's look at a number of important points related to the renovation of the property:
We learned more about how to install a mixer in the kitchen, and provided a video of the process itself. Now you are not to blame for the troubles associated with this process.
The main rule is to ensure the consistency and accuracy of your actions. Our video on the topic will give you detailed information.
The water supply point from the mixer is a design that is present in every kitchen. And it is unlikely that you will find a person who would like to not have to deal with the problem of a device breaking down in life. And I don’t want to have to deal with someone like changing the faucet in the kitchen.
Metal mixers in the kitchen interior.
This is the same situation if you need to replace this structure.
Signs of a broken faucet in the kitchen. Golovne - from afar, recognize and remember which faucet the buyer installed. This will make the replacement process much easier. And it’s easier to ask someone how to install a mixer in the kitchen.
The taps are designed to supply water at the required temperature for terminal boilers. By simply mixing hot and cold drinks, you can easily achieve the desired result.
The faucet has two valves that supply water. Є a number of structures that have achieved the greatest possible width.
These models with one valve have the simplest possible design. It has very few details:
Type of tap with one valve for supplying water. The valves are screwed into a special opening, possibly on both sides. The valves regulate the height at which the crane box is located. The water itself opens and closes the water, obviously due to the presence of a special gum lining. Installing the mixer with your own hands is not difficult.
Great faucet design with one key feature. Whenever there is a connection between taps and sinks, there are many different types of stench.
Repair of a ceramic scale in the kitchen. The first problem in any repair process is a reduction in the water supply itself. After which you are allowed to perform the following activities:
Replacing a tap with two valves. 
Replacing the faucet in the kitchen. For robots, dosit pristosuvan, nayavnih in the skin. The list consists of several positions:
Example of faucet replacement tools. Well, there is a new installation kit at hand. This set includes washers and screws, all elements for fastening. The stinks are sold as a complete set with accessories. The skin manufacturer attaches instructions to its devices, describing the features in detail. For cold water too.
In addition, you will need to add government accessories for the set of basins and buckets, ganchers. This makes it easier to reduce water to a minimum, which appears during the process of repairing an old machine. If we don’t notice the lithtar’s clothes, the fragments of the light won’t come out during the dismantling. Without it, the installation of the switch will not be manual.
From the beginning, the faucet itself is drawn from the packaging for the robot, purchases from the store. If visual inspection has not been done before, then this needs to be done immediately. Smut, so that there are no defects on the surface due to damage, which may be insignificant.
Mixer in the kitchen with a hand sensor. If the product is defective, the company stores are responsible for accepting it and exchanging it at the buyer's discretion. In this case, you need more information about saving your sales receipt. These are the parameters that deserve a thorough revision for older viruses.
The movement of the parts is due to being easy and smooth during operation. The model that emerges has no meaning. In areas of successful release, the smallest defects may be excluded. Otherwise, there is an imminent risk that the entire university will be damaged. And the old one will have to be replaced with the new one.
Ears and equals are guilty of losing the nickel-plated coating from the mixer during the hour of work. The presence of dents and dents on this vehicle is unacceptable. Damage is to blame every day on the dry polished casing.
When purchasing a new faucet, carefully inspect it for any cracks. The internal openings of the pipes themselves must be thoroughly cleaned before proceeding with the installation of a new pipe. A coarse metal brush will become a wonderful aid in your diet. Additional cleansing is required for the place where the mixture is installed on the surface. The driver helps him in this situation. І also for old parts.
Visuvnyy mixer in the kitchen. The next stage of dealing with this is to install the device there, where the blame lies. You can only insert flexible installation hoses into the sink opening with a diameter of up to 34 millimeters. After this, the device simply falls onto the canvas.
Installing a mixer in the kitchen. From the bottom of the kneading fabric it is necessary to reach the lower part, which is used by the kneader himself. Otherwise, it will not be possible to fit the tension washer onto the studs. Use nuts to tighten them to the surface of the sink. There is no need to crumble to the end in that vein. The body of the mixer may lose some free movement. This makes it easier to install the attachment in the center of the opening intended for installation. Only after centering and tightening the nuts on the studs are tightened the rest.
Installation of pipes and hoses at the bottom of the sink. The ends of the bungee hoses are connected to the main pipes only after the front work is completed. In modern designs, there are likely to be fitting nuts, which are initially supported by rubber gaskets. You just have to carefully turn them around in other places. In this case, follow the instructions as much as possible.
Wiring with different characteristics is available for kitchen mixers. Stitch the head so that there is no slack in the hoses. If the distance between the points exceeds 520 mm, the wiring will be inserted with an extension of up to 600 mm. The stilettos are also flexible for finishing.
When purchasing sensory and other important devices for mittya, be sure to tighten the stud fastening. The device with two important elements also has a fastening frame, but there are many modifications. In the remaining position, the support washer is tightened, which is supplemented with a nut that tightens. All at once the stench pervades the lower part of the body of the zmishuvach. However, such a design can be achieved by tightening the nut wrenches. There are a variety of different gas keys available for maximum power supply.
Plumbing fixtures are provided with a design that is easy to refurbish and complete. This is especially true for products used in the kitchen.
An exotic, professional model of the crane. Often, buyers decide to replace the original devices with electronic or sensor types. In practice, the establishment of models is the same as with traditional ones. In addition to the electronic method, the procedure is tied to several nuances.
Touch-sensitive professional faucet model for the kitchen. If there are two sinks in the kitchen, or one with a double sink, buyers can choose to install professional appliances, with high flow, with a 360-degree swivel, and also with a hanger take a shower.
Replacing accessories in Mitya follows the standard scheme. There are any possible changes to the scheme for reinstalling the fastening elements. Replacing the studs and when the bolts are twisted, open them differently.
It is recommended that any designs of this type be tested. This means that the virus is tested to preserve the tightness of all minds. The taps for supplying cold and hot water are opened along the side. After this, carry out a visual inspection of literally all places where leakage may occur. Just look at the nut and studs.
Butt of checking the tap for leaks. If no leaks were detected, this means that installation of the fittings was possible without additional openings.
The aerator must be removed from the mixer before starting operation. For an hour, it was necessary to let the water pass in order to clear the obstruction that was lost in the pipes. After the procedure is completed, the element being filtered rotates back. And then try the water supply in your operating mode.
Since the manufacturer is reputable, it gives a guarantee of at least five years on the device. Nuts and studs are not to blame. It's easy to recognize them.
Sometimes kitchen sinks come with wall-mounted mixer models. The advantage of this option is the ease of fastening right up to the pipes. For connection it is not necessary to remove the supply hoses.
Decorative wall unit in the kitchen. Wall hangings can be attached in two main ways. Either from external renovations or from walling up water pipes against the wall. Otherwise, replacement, in any case, is carried out due to the stagnation of one technology. The place where the pipelines are connected is the place where the mixer is firmly fixed to the pipes. Because of the combination of these special details, the design becomes especially valuable and reliable. It is impossible to recognize them.
Mixer in the kitchen with a nozzle for sprinkling water. 
Design of a kitchen mixer with a hanging curl. The koristuvach is to blame himself for depriving himself of part of the little hoses in the future. If this is so, then it is better to do so with maximum care. Golovny, before connecting again, you will need to reconnect so that the place is sealed. The landing hole on the arm can be further inspected and cleaned.
Mixers with two forks are the most popular variety of this device. This means that there are two working doors in the mixer. From one of the mitts water flows from the pipeline. Another opening can be used to serve rudiment with a high level of purification. It is useful both for cooking and for drinking.
Therefore, such mixing devices require not two, but three hoses. Replacing such a change is carried out using the described method. The nuts and studs will just stick together. The only difference is in these flexible hoses that are connected to the main structure. You can easily get back to work on your own without asking for outside help.
You can't do without water in the kitchen. Before the hour of waking up, a major repair of the room, or after a minor accident, it is necessary to install an air conditioner. Frequently, for the installation of robots, the fakhivtsy is called upon, if you know how to install it yourself (about fastening to the bathroom), then you can save your money. In this article we will look at how to turn on the mixer in the kitchen. We have great respect for the delicate work carried out, which is where the power and tools are needed.
Before you put the mixer in the kitchen, you need to add something. Is scurrying different views mixing, prote, their established principles are not disrupted by anything. The price of the device is reflected in the quality of the service, so it’s better not to skimp.
Before purchasing a plumbing fixture, it is necessary to measure the connection between the connection point and the central water supply. For the proper service to connect the mixer in the kitchen, there is no need to sag and bend a lot.
Considering the material used, the best option is a solid metal hose. The technicians check the material immediately - carry it with your hand every day, wipe it, if there is a lot of trace left on the bottom, then quickly replace the hose.
For installation you will need the following tools:
However, the instruments require fastening. It comes complete with a tap, but please check the package again. For Vikonannya work you need:
For modern kitchen mixers, no additional insulating stitch is required. All connections are covered with a humic gasket, which is sufficient for sealing.
All sensitive parts of the shirt, headset and other items must be stolen. Take away the dishes, clean the area for access to the area connecting to the central water supply. If the sink is ceramic, earthenware or metal with special coatings, it is better to cover the surface with cardboard to remove stains and cracks.
First you need to install a new mixer in the kitchen, you will need to dismantle the old one. It is clear that the old faucet is stuck to the sink and, in the course of dismantling, may damage the kitchen equipment. And here a special person, a clerk, can help. Deyakh fakhivtsi zastovoyut car zasіb – a rare key. Having completed your call, check for 15-20 hvilins.
Each device was fastened with additional nuts, the other with a special screw. For dismantling, you may need either a cross screw or a key. Cold and hot water is turned off so as not to flood the apartment before the hour of installation.
When purchasing a faucet, you will need to select a mixer for the kitchen. The gander is screwed to the other part of the mixer. After consolidation of guilt, one is obliged to freely turn to the offended party and not to get upset.
The eyeliners are screwed in; a wrench is needed for reliable fastening. First, twist the hoses until they stop by hand, then use a wrench to turn them one more time. It is important not to overtighten, otherwise the gasket will be sold and leaks may occur.
The pin is screwed into a special hole. There can be a complete division on it throughout the whole day, or the song can stand at one end. For reliable fastening, the pin can be pulled a little using an adjustable wrench or pliers. We spin the washer.
Next, the gorge’s ring is dressed. Its dimensions are exactly the same as the dimensions of the base of the mixture. The metal ring is hermetically sealed around the base of the ring. If you drain water immediately when washing dishes or cooked hedgehogs, it will not flow under the meat.
Now let's look at how to properly install the mixer in the kitchen.
After assembling the tap, it is secured to the arm. Before putting the mixer in the kitchen, the deyak masters remove the sink. This will help eliminate the need to climb into the cabinet and work on the underside.
Insert the mixer with eyeliners into a special hole. Some models of washers require a narrow opening for the liners; in such models, the hoses are connected through after the mixer is installed.
At the bottom of the mitt, a gum gasket is placed on the pin, after which the metal part is horseshoe-like. The additional gasket guarantees a tight connection.
The metal plate allows the connection to be reliably tightened, and gum fragments are washed away. In this case, it is recommended not to overtighten. While tightening, the position of the kneader is controlled, you must stand straight, and the opening of the hand must not be visible.
Since it is impossible to remove the sink from the cabinet, for example, the sink needs a sink (karmichna, earthenware), and it is attached with sealant to the frame, to manually install the sink you will need a pipe wrench. When installing a faucet on a faience sink, it is important not to overtighten the grooves; if it is too tight, the sink may crack or crumble.
Whenever a new piece is installed in a frame with a creased opening, all wooden edges are treated with a waterproofing agent. This approach will help eliminate the rot and swelling of the wood. The tightness of the joint of the bowl and the dish is ensured with silicone or an airtight stitch.
Let's take a look at how to mix it up in the kitchen to the central water supply. Zhidno sovereign standards When the water is cold, rinse it with a hose. At the hour of connection, pay attention to the presence of gum pads.
Screw it in by hand to check the hose position. Be careful, so that the stench does not bend, but is smoothly rounded. Then, behind the help of the separation key, connection begins. As in other places, it is important not to overtighten, so as not to push through the gum gasket, otherwise the joint will leak.
After the mixer arrives in the kitchen, the vicinity of the robot is checked. The water is turned on and after about an hour the connection between the pipes and the pipes is wiped with a dry cloth. Over the course of a year, with a dry hand, you can verify what the vologa is.
Correct installation of the mixer in the kitchen is an important factor in the performance and durability of this sanitary equipment. 
Similar articles:
There are a number of different types of mixtures. The simplest ones are valve controls. There is little progress and delay in repairs. Not enough - the most frequent leakage.
The optimal solution is to install a single-important mixer in the kitchen. This device is easy to use. To adjust the pressure and temperature of the water, one more important thing is determined.
When using double-valve mixers, you have to open two taps.
New products in the everyday industry include sensory mixtures. Work in automatic mode under the hour of reaching out to them.
It is impossible to properly install a faucet in the kitchen without the right tools and expensive materials. For work we need:
When installing the mixer to the table you will also need:
If the kitchen needs to replace the old mixer, then the flexible hoses that supply water to the plumbing fixture are also replaced.
The preparation work for the installation of the crane conveys the following features:
I know it’s better to know Mitya. This will make it easier to establish a reliable adjustment.
In most cases, the process of installing a mixer in the kitchen consists of two stages:
Let's talk about how to recognize the old zmishuvach. This process is carried out by following the following steps:
For such work as replacing a mixer in the kitchen, you can quickly use old hoses. The stinks come out of the tap, which becomes unusable, and are screwed into the slots of the installed accessory. The gasket on the skin hose is checked to ensure that it remains intact and in the correct place.
At the stage of installation work, it is necessary to select a kitchen mixer. Its package includes flexible hoses and fastenings (round rubber gasket-ring, washer, rubber socket and 1-2 studs with nuts).
Flexible hoses are screwed into the faucet to supply cold and hot water. Particular care should be taken to attach the rubber cuffs to the liner fittings, so that you can’t damage them every time. Before using it, it is recommended to soak some of it in water.
Further, the selection of the mixture consists of the following stages:
In the kitchen, installation of a sink can be carried out in two ways: a sink or a sink. The first technology is the most extensive. This is due to the fact that most kitchen sinks come out with the same openings for the faucet and water supply. And there is no need to take extra care in drilling the openings for the attachment.
With another method of installing the mixer body in the kitchen, it is allowed only if the mixer is made of a moisture-resistant material.
Installation of a sanitary fixture in a sink consists of the following stages:
The ring gasket based on sanitary fittings has a drying function. Always ensure that water does not flow under the sink.
While the outer surface of the device is in operation, be careful to protect it from mechanical damage. For this you can use duct tape. If the installation work is carried out correctly, the crane will not collapse or wrap, and the clear tightness of the valves will become a guarantee for long-term operation of the mixer.
This technology is transferred to the following robots:
When installed in the building, careful attention is paid to the installation of plumbing fixtures. A short distance to the sink can complicate the process of mixing (mixing) the valves, and, if necessary, it will cause water to get between the tap and sink when there is little pressure in the system.
You can improve the operating time of sanitary equipment in the kitchen using additional hard-connection technology. This method transfers the following algorithm of actions:
Depending on the type of fastening, the installation of adjusters is carried out using nuts or studs.
