Chest of drawers with two drawers directly metabox that two doors. Report on those that have metaboxes in sections directly for boxes. Before speaking, those with only drawers are called chests of drawers.
The description of the process of making a chest of drawers is divided into several stages:
To begin with, we are designing a chest of drawers using the PRO-100 program, we will remove the details that we need, we will arrange the opening and bring the parts home. We immediately insure necessary fittings, purchase metaboxes, hangings, handles, ties or confirmatories do-it-yourself chest of drawers.
For the help of the DYNALOG program, we work hard to drill open for fixing direct metabox to the side walls of the chest of drawers, as well as opening the space for the nozzles for fastening the facades to let's directly metabox.
One moment of design is carried out not for the whole body of the chest, but for part of the chest, where we plan to install two metabox drawers in our compartment.
As a result of the design, the following data can be obtained: the drilling of the side wall of the chest of drawers for fastening the metaboxes, as well as the drilling of the facades of the chest of drawers for fastening the facades.
Well, axis, we have the details at home and we proceed to do-it-yourself chest of drawers. It is sealed under the screed or to confirm the details to the body of the chest of drawers.
Open firmly under the hinges to install the doors securely directly metabox to the sides of the chest of drawers.
We remove the body of the chest of drawers and secure the back wall made of fiberboard.
At this stage we collect the boxes for the metabox. Why is the simplicity of this process: we do not need to drill the side walls of the boxes from chipboard, we simply select all the details of the box in one piece.
We remove the reliable, place the screen from the bottom of the chipboard, simply and easily.
We fasten the door to the lower part of the chest of drawers. Vykoristovuєmo loops with closers, do not screw up. The doors are frontally hardened under the hinge cup with a diameter of 35 mm. Without learning how to drill, start drilling by opening the facades in the place of buying facades.
Strongly fastened for drawers metaboxes to the facade to the rear of the broken nasіchok, zgіdno z our design at the first stage.
At the rest of the stage, we fasten the handles to the fronts of the chest of drawers. Wiishlo inexpensively and vzagali angrily.
Before speaking, the chest of drawers is very high, about 140 cm. If you want to increase the height of the drawers, then get more for height rear walls metabox drawer and add rails, order to work with the 32 mm frame.
How to pick out a chest of drawers yourself.
If you are desperate for money, you need a plan. Garny plan - tse already half done. Otzhe, є decision to choose a chest of drawers.
1) Roserobity concept.
2) Select the material.
3) Get the details of the chest of drawers.
4) Reconciliation of the application for the investigation of the material.
5) Bring the necessary fittings.
6) Prepare the necessary tool.
7) Proceed before picking up the chest of drawers.
In order to suffocate, you can look at the photographs of chests of drawers on various sites and portals. At the principle, cream form, chest of drawers can be divided into kilka categories.
1. Chest of drawers with overlay facades: 
2. Chest of drawers with internal facades: 
3. Chest of drawers with figured facades: 
There are more options at the bottom of the chest of drawers: with a flat one without. On decorative legs.
Choosing the design option, it is necessary to depend on the dimensions of your chest of drawers. Pіd dimensions toil on vazі such values: height; width; glybina. As with the height and width, everything is bigger or smaller, then with the depth of the chest of drawers, it is necessary to fold the depth of the drawers and the torso of the facade, like a chest of drawers with internal facades.
For a working butt, take a chest of drawers with overlay facades, with dimensions: 900 1000 460
At present, there is a wide range of laminated chipboards on the market, such as egger, kronopol, etc. Zavdyaki rich color scheme, obviousness of textures, choice.
Having chosen the color, you need to think about covering the ends. There are three main types of cover: No. 1 - creid amino edge. No. 2 - PVC edge of various commodities. No. 3 – t-profile. I recommend option No. 2 for the case and facades, and option No. 1 for chest of drawers.
Usі razmіri detaluvannya on razkrіy LDSP are written in millimeters! If the material you choose has a structure and expressions of little ones, then it is important to say, as if you are sawing a detail, for which you need to specify in detail: fix the structure, and for accuracy, duplicate before expanding.
Let's point the butt:
dresser height 900mm, to determine the height of the sidewalls of the chest of drawers, follow the height of the chest of drawers to choose the thickness of the cover: 900-18=882.
To determine the internal size of the dresser, according to the width, choose the width of the two sidewalls: 1000-36 = 964.
The depth of the drawers in the old houses is straight, for which the butt is 400.
Double chest of drawers: the internal dimension is 26 mm, which is a standard stand for installing both roller and revolving straight drawers. Enter: 964-26 = 938. To determine the size of the drawer part, you need to select two chipboard dimensions: 938-36 = 902.
After clarifying all the dimensions, the details are added. On the dimensions of the parts where the PVC edge will be glued, select the thickness of the edge - 2mm, if the edge is on one side, and 4mm on both sides.
The detailing can be folded by hand on the paper, head, so that the numbers can be clearly understood.
Chipboard color: Hacienda white. PVC edge 2/22 color: Wenge magic.
Vrahovuvat structure!
Page 1000 * 460 - 1 (cover). (Rozmіr 460 podkresliti 2 times).
Page 882 * 434 - 2 (side panels).
Page 964 * 80 - 1 (tsar).
Str.964 * 80 - 3 (tsarga and base).
Page 400 * 150 - 8 (boxes).
Page 902 * 150 - 8 (boxes).
Page 992 * 194 - 4 (facades). (offended by remembrance and re-creation 2 times).
Fiberboard color: white.
995 * 812 - 1 (back wall).
933 * 395 - 4 (bottom of screenshot).
The detailing is ready.
4) We place the agreement.
If you don’t know where the chipboard cutting companies are, go to the Internet and find a related company. Porada: choose firms that sell laminated chipboard in swarms, but not in whole sheets. After you have saved your prayers, you can buy fittings.
5) Accessories.
For the cob we put together a list of necessary accessories:
Handles – 8 pcs 
ask for guinty 40mm
Directly forged 400mm – 4pcs 
Confirmati (ties) – 24 pcs. 
Adjustable bearings – 4 pcs. 
Screws 3.5 16 - 100pcs 
Wood sanitizers 3.5 32 – 34pcs 
Tolevi flowers - 70 pcs. 
Melamine wenge edge magic – 25mp 
We take the list and go to the market or to the furniture fittings store.
6) The tool is ready.
To assemble a chest of drawers yourself, you will need the following tools:
12. Olivet or a thin marker.
13.Rozchinnik 646 or a medium for removing nail polish.
14. Shmatok completely.
15. Small emery paper.
1) Folding chest of drawers.
Once you have collected your parts, bought accessories and prepared the necessary tools, you can begin to fold the chest of drawers. For the beginning, it is necessary to think over a manual position, since the “knee fold” is very difficult and very injury-proof. For our purposes, we will use an old kitchen table (if you don’t have a bench). We need to prepare the details first, then. Glue the melamine edge over the parts of the drawers, base, lid, sides. How to glue a melamine frame can be found in the article in the “Furniture” section. Before gluing the side panels, make cuts under the plinth, if necessary. The holes under the plinth can be made with a metal hacksaw. Make the slots under the plinth measure 70*40 on the rear (not covered with PVC edge) lower side of the side panel.
The chest of drawers is glued on the back side.
Sidewalls - on the back and bottom sides.
Plinth with two long sides.
Details of the drawers - one per piece.
Now, after preparing all the details, we begin to assemble the chest of drawers. First, let's take the drawers of the chest of drawers, for which we need: a drill, a drill for confirmation, a confirmation, a key for confirmation (as there is no screwdriver). To fold one box we take parts: 400 150 – 2 pieces, ta 902 150 - 2 pcs. We take two parts: 400 and 902, place them on the table in such a way that cut 90 is created, and part 400 covers the end of part 902. By rubbing the two parts with one hand, we make an opening for confirmation , through part 400 to end 902. part 9mm at the edge . Let's confirm the details. 
We take part 902, and apply up to 400 from the other side, parallel to the drilled 902. Then 400, which is missing, is added to the ends of 902. In this way, we remove a box with dimensions: 938 * 400 
Having collected all the boxes, you need to attach a note to them. We place the box on the table face down, cover it with fiberboard, and pierce one long side of the box with flowers (along the edges, near the center, and also along the flower between the center and the edge). 
On the other side of the box, not all the way to the end, we stuff flowers in the center of the side. Using a tape measure, we check the diagonal dimensions of the box, trying to ensure that the smells become the same. If the diagonals of the box are still dark, we hammer in the flowers, just like on the first side. On the sides 400 we hammer in one flower at the center. Using an additional 8mm drill, carefully drill out (more precisely, grind) holes for 3.5*16 screws in the fiberboard; best place the drill in reverse - this will help to avoid cutting through the fiberboard. There are holes for self-tapping screws on four sides of the box between the clogged flowers. 
Having screwed the bottom of the box with screws, we place it on the bottom with side 400 and, behind another line, mark a line straight to the center. Take a size of 75mm from the bottom of the screen. Let's take it straight: in order to reach the central part, you need to pull it straight out until it stops, 
press on the stopper and pull the central part all the way out. 
Place the central part on the marked line and screw it with 3 screws 3.5*16. Turning the box over, repeat the action. It is important to screw it so that the front folded edges rest straight on one side of the drawer.
After all the chest of drawers are prepared, we begin to assemble the frame. We place the two sides of the chest of drawers on the table, mirroring one to the other, so as not to mix up the sides. We mark the lines to the center of the straight lines. In order to know how to place it directly, you need to know: the height of the front, and stand from the bottom of the drawer to the straight line. To ensure that the bottom of the upper cover does not rub against the lower facade, it is necessary to raise the bottom of the drawer, in line with the facade by 10 mm. The place is to directly irritate the beast to the bottom. Then we take the gap between the upper facade and the lid of the chest of drawers (3mm), the height of the facade (198mm), we extend 10mm to the displacement of the drawer in relation to the front, we remove 75mm (from the bottom of the drawer to the center of the straight line) ). 3 +198 = 201, 201-10-75 = 116. So, since the fronts in the chest of drawers are the same in height, other dimensions can be determined based on the height of the front and the gap: 116 201 = 317, 317 201 = 518, 518 20 1 = 719. 
We mark the straight lines and screw them to the sides of the chest of drawers. Having turned the parts over, mark the openings for fastening on the sides. On the top side 40 9 front and back, bottom front 40 30, behind 9 110.
Having carefully placed the drawers in the frame, we stuff the back wall of the chest of drawers (fibreboard is nailed to the top side under the lid) and at the side of the chest of drawers, we fill in two pieces (at the bottom and in the center).
We size the openings for handles on the facades, take the central line of the facade, mark the first opening 100 mm from the edges of the facade and add the size of the second handle (96,128,192...). Open under the handles with a drill bit to confirm.
The facades are installed starting from the top. We tighten the façade with the one we need with one hand, screw it through the openings for the handles (make sure that two outer openings are enough). After carefully opening the drawer, being careful not to displace the facade, we screw the facade to the drawer using 4-6 screws 3.5*32 on the side of the drawer. Having installed all the facades, we unscrew the mounting screws from the openings under the handles and drill them through. We insert screws for handles, we insert handles.
Having re-cut everything correctly, we hammer in the back wall of the chest of drawers from the sides with flowers, and screw the bottom of the back wall to the drawer with screws. During the marking process, they were scratched with a marker, erased with a nail polish remover or with a nail polish remover.
The chest of drawers is ready!
The practicality and handiness of the chest of drawers have been improved over the course of time; it is not without reason that this piece of furniture does not lose its relevance over the course of a century. Of course, you will also appreciate all the functional advantages as they appear in your home. Scarpets, hustkas, and stylish whites will find their rightful place. However, you can completely remove the chest of drawers at the front room, and you will become a source of parasols, gloves and cosmetics.
At the chest of drawers, problems with saving other speeches will immediately arise.
Don't make a mistake architectural features Placed and already visible items in the interior, you can add a chest of drawers at the store. Even more often, the standard dimensions of the vibrator are absolutely not suitable for placement in an apartment. Therefore, an alternative option is to prepare it at home. Roblyachi DIY chest of drawers You will have the opportunity to independently develop the design, choose the optimal dimensions, palette of colors and material structure.
A chest of drawers, made with your own hands, can fit as organically as possible into the original concept of style.
Until then, I’ll have to spare some of the parts pennies worth. The amount you would charge for purchasing a similar chest of drawers at a retail outlet, you can spend on simple fittings (handles, directly) or on more important accessories.
There are a lot of people who don’t notice how many brown objects there are in the chest of drawers.
About how to make a chest of drawers with your own hands available in today's statistics. Even though it doesn’t care about simplicity, it still has its own nuances, which you need to be aware of in advance, so that the final result pleases you with a long life, and does not become a reason for frustration.
The chest of drawers is more light and sophisticated. When used as a shafi, it doesn’t look bulky.
If you are confused about your artistic taste and design frills, then looking for ideas for creating a chest of drawers with your own hands, you can look through the catalogs of other furniture manufacturers. Chantly, among the faceless minds, let me know the best option, which will need to be less than a trifle adapted to individual drinking.
The accessory of the chest of drawers is that it is wine, like a table-console, it can be transformed into one of the decorative centers of the place.
The standard dimensions of the chest of drawers may include the following dimensions:
The chest of drawers can be decorated with decor, even if it is very active and brightened up.
At the top of the wide chests of drawers, there is a trace of reinforcement of the lower part of the drawer. Also ensure that with great importance in the process of using boxes, visuvna system may become deformed and seize.
The top of chests of drawers is decorated with floor lamps, anniversaries, candles, figurines, vases, roslins, screens, photographs, souvenirs.
Chests of drawers made of natural wood are becoming a favorite. And the modern materials that are used to decorate allow not only to make them, but to decorate them in the technique of decoupage or artistic painting.
This type of decor is easy to match with a stencil.
Of course, wood is deprived of the most valuable material for the manufacture of furniture, and no less popular is the remaining fate of laminated chipboard, which brings about:
Today's chest of drawers in the interior is simply irreplaceable.
When preparing drawer facades, instead of laminated chipboards, they are made of chipboard, and the finished frame is decorated with MDF overlays. Such a chest of drawers looks much more expensive and presentable.The massive top lid adds solidity to the chest of drawers. If you have a budget, they can be made from 2 balls of 16 mm laminated chipboard, twisting them together, and sealing the edges with a wide stitch.
By expanding the design of the chest of drawers, you will appreciate the future placement in the room.
Even more often than not, it is important to place the furniture against the wall when using a skirting board. There are a number of options here:
If you don’t yet have a similar item in your daily routine, then after becoming intimately familiar with it, you immediately destroy it.
If you use computer programs for furniture design, your work will definitely become easier. Otherwise, you can go through the following options:
When folding the chair, make sure that the thickness of the LDSM is no less than 16 mm.
There are options of 10, 16, 18, 20 mm.From the side walls of the chest of drawers to the side walls of the drawer, fold 12.5 mm from the skin side to place directly.
The back wall of the chest of drawers must be positioned at least 15 mm from the outer edge of the drawer to prevent deformation.
Fix the edge thoroughly. If the thickness is 1 mm, then this part must be removed from all sides of the parts.Considering the size of the facades, remember not only the edge, but also the gap between the drawers. The height of the façade needs to be increased by 5 mm (thickness of the edge above and below + 3 mm gap).
As a butt, the detailing of the chest of drawers is made from a sheet of 16 mm thickness and secured with a melamine stitch of 0.5 mm.
To prepare the bottom of the drawers and the walls of the chest of drawers, fibreboard is used.
Table 1
| Name of parts | Dimensions mm | Quantity, pcs. | |
| 1 | Chest of drawers | 800x500 | 1 |
| 2 | Bichna stand | 816x475 | 2 |
| 3 | Lower part (bottom) | 800x475 | 1 |
| 4 | Facade | 797x205 | 4 |
| 5 | Tie rod | 768x80 | 2 |
| 6 | Bichna part of the box | 160x450 | 8 |
| 7 | Front part of the screen | 160x709 | 4 |
| 8 | Back wall of the box | 160x709 | 4 |
| 9 | Back wall of the chest of drawers | 828x795 | 1 |
| 10 | Bottom part of the screen | 738x447 | 4 |
Let's take a look at the report How to make a chest of drawers with your own hands from LDSM.
The process needs:
Tools and materials.
DIY chest of drawers We singly bring joy to you and the members of your family for many more years to come.
