Lyric entry. Tі, who is already sticking with the repair, it’s too early to fix a new shafa! Boxes and temporal hangers on the floor are not handy, so impatiently check the moment, if you can lay out the speech on the floor, you can hang on the shoulders of all your beloved cloth, everything will be under your hand! Like the Internet, and the people who put up their closets! The best photos were saved, developed and discussed all the time!
At the start we had an axis of such a niche with a width of about 1.80 m (with a wooden outpost under the stele), where it was planned to install rose doors, and expand the inner space of the wardrobe for a person and a woman’s half, removing the space for blankets / pillows that off-season clothes. Doors wanted to be glassed out of colored plіvkoy.
The axis is such an option to open (nachebto) all favors and transfer the visibility of all two doors.
If there was a question about the need to choose a profile for sliding doors, the priority was given to the Versailles aluminum profile for a number of reasons:
Vibir falling on gold =)
All in all, 3-4 tyzhnі ochіkuvannya that zamovlennya is ready!
About the "internals":
Along the perimeter of the shafi, smuga is fastened from chipboard. Zavdyaki їm zvnі vbudovana shafa looking like a zvichayna shafa, but from wall to wall! If you are planning such an option - make sure the walls are as sharp as possible to hide the visible gaps! =)
rollers uphill
Filling of the left part
Regardless of those who reach wide and important doors, it is even easier to cross them, to wind them with old nails! The movement moves quietly and smoothly, the doors do not hit and do not shake. You can bulo install closers, but we have settled on closers on the boxes
Now the nuances are low, about the yak it was necessary to know:
Vlashtuvannya compartment doors Versailles guess designer. All warehouses can be mentally subdivided into two great categories:
zapovnennya, At its core, it is a kind of sheet material (10 mm laminated chipboard, fold or mirror, MDF and іn), which, when folded, is fixed in the grooves of the frame.
In vipades, if the mirror or mirror is turned on before the structure of the doors, it is victorious a kind of superficial fixation of a 4-mm sheet at a 10-mm groove.
Aluminum The framework of representations of the sequence of profiles of various cuts.
Let's take a look at their report
Upper straight (upper track)
- tse Sh-podіbny (podvіyny) or P-podіbny profile at which the upper edge of the doors moves, resting against the side ledge rollers. To the laminated chipboard, the top is directly fastened with screws with a crochet of 300-500 mm.
Upper horizontal profile (upper horizon)
Surrounding the doors of the beast. The lower part has a 10 mm groove for filling, the upper part has a channel assembly guide, for the help of such a horizon to creep up to profile handles, tightening them between themselves, at the same time fixing the upper roller (div. below).
Handle profile - encircle the doors from the sides, at the same time giving hardness to the entire structure. There are two main variations - symmetrical and asymmetric. As a result, the shape of the first in all virobniki is approximately the same,
then the symmetrical handles can be strongly reinforced one in one, and not only in shape - in the H-like profile of the firm Grandis (No. 3 in the figure), you can install a pvc edge, whether it be a color, which significantly expands the possibility of decor. The handles of the "Znaydi" company (No. 1 and 2) are suitable only for the doors of great roses due to their visual solidity.
At the inner groove, the lining is installed. From the opposite side of your side, there is a burial under the shield-shlegel, which is self-adhesive.
At the upper and lower parts of the handles, drill the mounting openings - at least 3 per handle (2 for the profiles between each other - can be more [for profiles-extenders]. At least - for fixing the support rollers).
Intersectional profile (dilitel)
tse profile H-like shape, which is used for fixing the details of filling both different (for example, folded and laminated chipboard) and uniform (chipboard with different decor).
There are also two main variations - with a channel for the gwent and without it. The first vvazhaetsya poslenim and gives the possibility to additionally tighten the structure with screws.
There are also stickers that allow you to visually divide the filling into sections without complicating the folding process.
Lower horizontal profile (lower profile)
- High profile, which does not only tighten the lower part of the profile-handles, but also attaches the lower rollers, preventing them from shifting in a transverse straight line.
At the upper part there is a groove for filling; at the lower part there is a channel for mounting screws and rollers.
The bottom is straight so you can be subway and single behind her on move the doors themselves, the cream of which should be placed in the guide grooves stopori (positionaries).
The colors of the viconnanny of the profiles of Versailles should be made wider. It includes anodized decorations, as well as gluing with "under the tree" tile.
Roller set -
one door is stacked with a pair of upper rollers and a pair of lower rollers. The lower ones are all the same, as well as the upper ones are distinguished by the type of profile-handles on symmetrical (right in the figure) and asymmetric (left in the figure).
The upper rollers are fastened without a middle to the profile handle, pressing with a mounting screw.
The lower roller is fastened with a screw (the lowest opening). The main screw is adjustable. Wrapping yoga can lift / lower the edge of the doors.
The kit also includes 4 mounting screws 5x30
Silicon sealer
serve for fastening at the grooves of the profiles of the backing of the fold. Slope may be "burned" by a narrowing around the perimeter.
Vіn buvaє raznogo perіzu. R_novidi vіdіznyayutsya for the strength of the reinforcement of the rozіru skіl, scho zatskаєєєєєєєєєєє (4 or 8 mm) і, apparently, tsіnі.
stop positioner
be installed at the lower straight lines.
The function of closing the doors in the required position (making/fixing).
Shchіtka-schlegel (fuzzy shield) to serve for the relief of hitting against the side wall of the body when the doors are closed, as well as for the tight fit of the doors to the body (the sling of the saw).
Z inner side security with a sticky ball, like to be glued to a profile handle.
Shoe for Schlegel (pinch) -
poklikana zapobіgti vіdkleyuvannu schіtki-schlegel, yak pochinaєetsya, as a rule, from the edge. Press the shield to the profile handle.
stickers for closing, open at the profile handles - the shield-schlegel sticks to them more quickly.
At the offensive division, I will tell you about another view furniture fittings- Joker systems. The roots of one's versatility often get stuck in cabinet furniture, as a rule, in the form of a different kind, but there are still thousands of things stuck in it, many of which are not obvious.
When preparing a closet compartment, the aluminum system becomes very popular open doors for wardrobe "Versailles". Profile "Versailles" successfully zastosovuєtsya in the preparation of pick-ups, wardrobes, wardrobes.
Anodized aluminum profiles"Versailles" is supplied with several traditional colors: silver, gold, champagne and cognac. Also, the profile can be veneered with PVC "under the tree".
Profile "Versailles" on the market of representations by the brand "Versal-Elite" (Turechchini production) and by the brands "Versailles" and "Versailles-Light" by the production of Russia (Vidne metropolitan area). All the sights of the profile are shaken by three different geometries, which is necessary to insure the rozrahunka of the shafi for an hour. So the profile of Turechchini's swivel range is extended to the standard profile-handle of 1.5 mm, less expensive profile-handles "Senator" with a smaller torso (1.3 mm), and the profile of "Versal-Light" can have a torso of 1.2 mm. Also, there are small differences in color: “Versal-Elite” has bright colors of gold and bronze.
Usі system "Versailles" as vіtchiznyа, so i іmportny vіrobnitstv vіdrіznyає vysokіnіst, bezshumnіst, dovgovіchnіst, simplicity of folding.
The profile of the "Versailles" system can be tweaked for the preparation of a wardrobe with a door made of chipboard, a warehouse, a mirror. If so, the chipboard is 10 mm thick, then it can be installed without any improvement. Ushchіlnyuvach dodatkovo will be needed when installing doors from 8-mm chipboard, as well as when vikoristannі skla or mirrors zavtovshki 4 mm.
When re-roofing the closet wardrobe with different profiles "Versailles", it is necessary to ensure that the maximum weight of one door is not to be changed by 50 kg (with the improvement of the weight of the profile itself and rollers). As the doors of the future wardrobe may have a large area and a large vіdpovіdno vag, it is recommended to vikoristovuvat lighter material for chipboard. Better vikoristovuvati acrylic chi plastic.
Profile "Versailles" offers two options for the profile of handles - symmetrical and asymmetric with their upper rollers. Tse gives the possibility of attaching defects and fixing, for example, if at the ends of the chipboard it can be covered with profiles.
The height of the straight profile is 6.2 m.
The set of the Versailles aluminum system includes all the necessary fittings for choosing doors: rollers, locking springs, gum, felt felt, plugs. All the details exude a high degree of arrogance and arrogance.
